GB 13122-2016Hygienic specifications of flour milling factory (English PDF)
Also coversGB13122-2016
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for GB 13122-2016 in 30 minutes.
Issued by
National Health and Family Planning Commission of the People’s Republic of China
Level / Type
National · Mandatory
Issue date
December 23, 2016
Implementation date
December 23, 2017
Scope
GB 13122-2016 (Hygienic specifications of flour milling factory) is available as an English-translated PDF.
GB 13122-2016 is the Chinese standard "Hygienic specifications of flour milling factory".
Its scope clause reads: This Standard specifies the basic requirements and management guidelines for sites, facilities and personnel during material purchase, processing, packaging, storage and transportation and others in the process of processing cereals into rice, wheat flour, corn ballast, corn flour and other primary products through physical methods such as machinery.
This Standard applies to the processing of cereals into rice, wheat flour, corn ballast, corn flour and other primary products through physical methods such as machinery.
Its clauses include application scope; terms and definitions; apply.; site selection and factory environment; plant and workshop; facilities and equipment; hygienic management; inspection; storage and transportation of products.
It was issued by the National Health and Family Planning Commission of the People’s Republic of China on 2016-12-23 and took effect on 2017-12-23.
Found what you need?
Document preview — GB 13122-2016
National Standard of the People's Republic of China
Issued by: National Health and Family Planning Commission of the People’s Republic of China
Contents
- Foreword...3
- 1 Application Scope...4
- 2 Terms and Definitions...4
- 3 Site Selection and Factory Environment...4
- 4 Plant and Workshop...4
- 5 Facilities and Equipment...4
- 6 Hygienic Management...5
- 7 Raw Materials, Food Additives and Food Related Products...6
- 8 Food Safety Control for Production Process...7
- 9 Inspection...8
- 10 Storage and transportation of Products...8
- 11 Product Recall Management...9
- 12 Training...9
- 13 Management System and Personnel...9
- 14 Record Keeping and File Management...9
Foreword
This Standard replaces GB 13122-1991, Hygienic Specifications of Flour Milling
Factory.
Compared with GB 13122, the major changes of this Standard are as follows.
-- the standard name is changed into "National Food Safety Standard – Hygienic
Specification for Cereals Processing ";
-- the application scope is extended;
-- the framework of standard clauses is modified;
-- the specific requirements for product tracing and recall are added;
-- the management requirements for records and documents are added.
National Food Safety Standard -
Hygienic Specification for Cereals Processing
1 Application Scope
This Standard specifies the basic requirements and management guidelines for sites,
facilities and personnel during material purchase, processing, packaging, storage and
transportation and others in the process of processing cereals into rice, wheat flour,
corn ballast, corn flour and other primary products through physical methods such as
machinery.
This Standard applies to the processing of cereals into rice, wheat flour, corn ballast,
corn flour and other primary products through physical methods such as machinery.
2 Terms and Definitions
For the purposes of this document, the terms and definitions defined in GB 14881-
2013 apply.
2.1 Cereals
The seeds of grass family herbaceous plants, such as rice, corn, sorghum, barley,
highland barley and so on.
3 Site Selection and Factory Environment
As specified in Article 3 of GB 14881-2013.
4 Plant and Workshop
4.1 As specified in Article 4 of GB 14881-2013.
4.2 Floors which are used to stack and dry cereals, semi-finished products and
finished products, shall not be paved with materials containing hazardous substances
such as asphalt.
5 Facilities and Equipment
5.1 Facilities
As specified in 5.1 of GB 14881-2013.
5.2 Equipment
5.2.1 As specified in 5.2 of GB 14881-2013.
5.2.2 Warehouses shall be provided with the equipment for cereals condition
monitoring including cereals temperature and warehouse temperature, temperature-
humidity regulation such as ventilation, cereals safe storage such as prevention and
control of insect pests, rats and birds.
5.2.3 The outlets for dust emission shall be provided with dust control devices.
6 Hygienic Management
6.1 Management system
As specified in 6.1 of GB 14881-2013.
6.2 Hygienic management of factory environment
6.2.1 Factory areas and areas adjacent to workshops shall be kept clean. Roads and
floors within factory areas shall be maintained well without damages and prevented
from dust and ponding water.
6.2.2 Keep the environment within factory areas clean and tidy and do not stack or
store debris and unnecessary appliances and materials, to prevent pests generating.
6.2.3 Plants which are liable to produce pollen shall not be grown within the areas
adjacent to workshops.
6.3 Hygienic management of plant and facilities
6.3.1 As specified in 6.2 of GB 14881-2013.
6.3.2 Measures (such as screen windows, air curtains, fences, moth-killing lamps
and so on) shall be taken for production operation sites to prevent the intrusion of pests.
6.3.3 Workshop water storage tanks (towers and ponds) shall be cleaned periodically;
the cleaning conditions shall be reported; those which requires necessary sterilization
shall be certified for the effects of sterilization.
6.3.4 The water used to clean the equipment and tools in contact with products shall
be as specified in GB 5749.
6.3.5 The detergents used to clean the equipment and tools in contact with products
shall be as specified in GB 14930.1.
6.3.6 Maintenance shall be carried out periodically for the filtration system of
8.4 Physical pollution control
As specified in 8.4 of GB 14881-2013.
8.5 Production process
8.5.1 Impurities and mouldy kernels shall be removed in the cleaning of raw materials
to prevent impurities entering into subsequent procedures and causing product
pollution.
8.5.2 Water used for production shall be as specified in GB 5749.
8.5.3 Effective measures shall be taken to prevent metals or other foreign materials
coming into products.
8.5.4 During the production process, repairs of production equipment shall not be
carried out on site.
8.5.5 Enhance daily maintenance of equipment and keep equipment clean. Correct
operating procedures shall be carried out for the maintenance of equipment. The faults
of equipment shall be removed on a timely basis to prevent influencing product quality
and hygiene. Before production is started each time, check whether equipment is in
the normal status. All production equipment shall be overhauled periodically and
records of maintenance shall be taken.
8.6 Packaging
8.6.1 As specified in 8.5 of GB 14881-2013.
8.6.2 Outer packing shall be marked with product lot number, quality guarantee
period and other content; the method for marking is preferably printing.
9 Inspection
As specified in Article 9 of GB 14881-2013.
10 Storage and transportation of Products
10.1 As specified in Article 10 of GB 14881-2013.
10.2 Finished products shall be stored separately in accordance with varieties,
packaging forms and production dates.
10.3 Finished products shall be inspected periodically; in case of any abnormality, it
shall be handled on a timely basis. Warehouses shall have temperature-humidity
detection measures and records.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
How to Download GB 13122-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 13122-2016
$65.00