CJ/T 386-2012Integration cooking appliances (English PDF)
This is a limited preview
Buy now to download the full PDF (28 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 386-2012 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 1970
Implementation date
January 1, 1970
Scope
CJ/T 386-2012 (Integration cooking appliances) is available as an English-translated PDF.
CJ/T 386-2012 — This standard specifies the terms and definitions integrated cooking range, classification and type, requirements, test methods, inspection rules, labeling, packaging, transportation and Storage.
This standard applies to the use of gas GB/T 13611 and single burner rated heat load of not more than 5.23kW with exhaust Set integrated gas cooker. This standard does not apply to mobile transport vehicles used in integrated stoves.
Found what you need?
Document preview — CJ/T 386-2012
National Standard of the People's Republic of China
- ICS
- 99.140
- Classification
- P 45
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and model
- 4.1 Classification
- 4.2 Model
- 5 Requirements
- 5.1 Structure
- 5.2 Materials
- 5.3 Performance
- 6 Test methods
- 6.1 Test conditions
- 6.2 Structural test
- 6.3 Material test
- 6.4 Performance Test
- 7 Inspection Rules
- 7.1 Factory inspection
- 7.2 Type test
- 7.3 Test items failed classification
- 8 Identification, Packaging, Transport and Storage
- 8.1 Logo
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- Appendix A (Normative) Electrical Safety
- Appendix B (Normative) Installation of integrated control system electronic control system electromagnetic compatibility safety
- Appendix C (Normative) Indoor CO2 concentration
- Appendix D (informative) This standard supports the provisions of the basic requirements of GB 16914-2003 Table 30 correspondence
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban-township gas standard technical focal points centralized.
Appendix D gives the standard support GB 16914-2003 the basic requirements of the corresponding table.
This standard was drafted. National Gas Appliances Quality Supervision and Inspection Center, Zhejiang Mei Industrial Co., Ltd., Zhejiang kitchen hall Electric Co., Ltd., Zhejiang Putian Electric Co., Ltd., Zhejiang Senge Electric Co., Ltd., Zhejiang Martian kitchen utensils Co., Ltd., Guangdong, the United States and the kitchen Wei Electric Manufacturing Co., Ltd., Hangzhou boss Electric Co., Ltd., Zhejiang Shuai Feng Electric Co., Ltd., Zhejiang Songya Electric Co., Ltd., Jiang Su Guangmao Gas Appliance Co., Ltd., Jiaxing Furui New Energy Technology Co., Ltd., Guangdong MACRO Gas Co., Schindler Technology Group Co., Ltd., Nuofu Electric Co., Ltd., Zhongshan City, Wind Kitchen Electric Co., Ltd., Zhejiang Hongxiang Kitchen Co., Ltd. Zhejiang excellent Kitchen Appliance Co., Ltd., Ningbo Yinzhou Shige Electric Co., Ltd., Zhejiang Yu School Kitchenware Co., Ltd., Zhejiang Gas Industry Association, Shaoxing Jindi Electric Co., Ltd.
1 Scope
This standard specifies the terms and definitions integrated cooking range, classification and type, requirements, test methods, inspection rules, labeling, packaging, transportation and Storage.
This standard applies to the use of gas GB/T 13611 and single burner rated heat load of not more than 5.23kW with exhaust Set integrated gas cooker.
This standard does not apply to mobile transport vehicles used in integrated stoves.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs GB/T 1019 Household and similar electrical appliances packaging General GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch inspection sampling plan by acceptance quality limit (AQL) GB/T 2828.2 Sampling procedures for inspection - Part 2. Lumped batch inspection sampling plan by limit mass LQ GB/T 3768-1996 Acoustic sound pressure method for the determination of noise source sound power level above the reflective surface using envelope measuring surface of the Jane Easy method GB 4208 enclosure protection (IP code) Household and similar electrical appliances - Safety - Part 1. General requirements GB/T 5013.1-2008 Rated voltage 450/750V and below rubber insulated cables - Part 1. General requirements Polyvinyl chloride insulated cables of rated voltage 450/750V and below GB/T 7306 (all parts) 55 ° sealing pipe thread GB/T 7307 55 ° non-sealed pipe thread Measuring methods for contact current and protective conductor current GB/T 12113-2003 GB/T 13611 urban gas classification and basic characteristics Domestic gas cooktops Household gas appliances GB/T 16411-2008 General test methods GB/T 17626.4 Electromagnetic compatibility test and measurement techniques fast transient burst immunity test GB/T 17626.5 electromagnetic compatibility test and measurement techniques surge (impact) immunity test GB/T 17626.11 electromagnetic compatibility test and measurement techniques voltage dips, short interruptions and voltage variations immunity GB/T 17799.1-1999 Common Criteria of Electromagnetic Compatibility Immunity Test in Residential, Commercial and Light Industrial Environments CJ/T 157-2002 Coated Tempered Glass Panels for Domestic Gas Cooktops
3 Terms and definitions
GB 16410-2007 as defined in the following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1019General requirements for the package of household and similar electrical appliances
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2828.2Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
- GB/T 5013.1-2008Rubber insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements
- GB/T 7307Pipe threads with 55-degree thread angle where pressure-tight joints are not made on the threads
GB/T 3768-1996 · GB 4208 · GB/T 7306
How to Download CJ/T 386-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1019-2008 — General requirements for the package of household and similar electrical appliances
GB/T 10190-2012 — Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification -- Fixed metallized polypropylene film dielectric d.c. capacitors
GB/T 10199.1-1988 — Test procedure for facsimile apparatus--Documents facsimile (analogue)
Secure payment via Stripe
Payments accepted
CJ/T 386-2012
$834.00