CJ/T 326-2010Plastics inspection chambers for sewerage in municipal engineering (English PDF)
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 326-2010 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
March 15, 2010
Implementation date
August 1, 2010
Scope
CJ/T 326-2010 (Plastics inspection chambers for sewerage in municipal engineering) is available as an English-translated PDF.
CJ/T 326-2010 — This standard specifies the classification and marking of plastic inspection wells for municipal drainage, raw materials, requirements, test methods, inspection rules, signs, standard Sign, instruction manual, shipping and storage.
This standard applies to the maximum depth of 7m, long-term water temperature below 40 °C, made of polyethylene and polypropylene plastic inspection wells.
Found what you need?
Document preview — CJ/T 326-2010
National Standard of the People's Republic of China
- ICS
- 91.140.80
- Classification
- P 41
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This standard specifies the municipal drainage with plastic manhole classification and marking, materials, requirements, test methods, inspection rules, marking, labeling, manual, transport and storage. This standard applies to a maximum depth of 7m, long-term water temperature below 40°C, the production of polyethylene and polypropylene plastic manhole.
Document data
International classification (ICS): 91.140.80.
Chinese classification (CCS): P41.
Estimated length of the Chinese original: 32,372 words.
Adopted international standard: prEN 13598-2-2009, NEQ.
Standards quoted by this document
GB/T 1033.1; GB/T 1040.1; GB/T 1040.2; GB/T 3682; GB/T 6284; GB/T 8804.3; GB/T 8806; GB/T 9341; GB/T 9647; GB/T 14152; GB 15558.1-2003; GB/T 17037.1; GB/T 17391; GB/T 18173.3; GB/T 18251; GB/T 18742.1; GB/T 18742.2; GB/T 19472.1; GB/T 19472.2; GB/T 21873; GB/T 23858; GB 50010; GB 50014; GB 50204; CJ/T 233-2006
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033.1Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1040.1Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 3682Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- GB/T 8804.3Thermoplastic pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes
- GB/T 9341Plastics -- Determination of flexural properties
GB/T 6284
How to Download CJ/T 326-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50010-2010 — Code for design of concrete structures
GB 50014-2021 — Code for design of outdoor wastewater engineering
GB 50204-2015 — Code for quality acceptance of concrete structure construction
Secure payment via Stripe
Payments accepted
CJ/T 326-2010
$774.00