YY/T 1501-2016Dentistry—Graphical symbols for dental instruments (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the direct translation method equivalent to ISO 21531.:2009 "dental dental instruments graphical symbols" (English version). With this Standard normative reference documents cited in the international documents are consistent with the relationship between China's documents are as follows.

--- GB/T 4880.1 Language name code Part 1. 2 letter code (GB/T 4880.1-2005, ISO 639-1.:2002, MOD);

GB/T 9937 (all parts) Oral vocabulary [ISO 1942 (all parts)];

--- GB/T 7408 Data and exchange format Information exchange date and time representation (GB/T 7408-2005, ISO 8601.:2000, IDT). This standard has made the following editorial changes.

--- in accordance with GB/T 1.1-2009 some of the arrangement format has been modified;

--- Remove the ISO preface section.

Introduction

Graphical symbols are used in many areas in everyday life. They give the necessary and useful information in a variety of ways. they As a signal (warning or alarm signal) to provide general information, as a way to provide the correct control of machines, instruments and other applications. As well as others Form of communication.

Graphic symbols are international versatile, eliminating the need to understand the difficulties, possible misunderstandings and expensive translations.

This standard gives a simplified mark to avoid the formation of other symbols that may convey the same information separately.

This standard contains a series of symbols (graphic) for oral use, and their use should be considered as oral medicine equipment for oral devices and Instrumentation and packaging culture. Their use is limited to dentistry and as a very effective way of communication. Dental dental instruments graphic symbols

1 Scope

This standard gives a series of graphic symbols for dental instruments. These graphic symbols are dedicated to the field of dental or dental phase Should be identified in specific areas, common symbols to the relevant ISO, IEC or other international documents, some by the manufacturer or the user to provide new symbols Number is also increased.

Because many dental products as some medical equipment, and some do not as medical equipment. In dentistry, ISO 15223 specifies the character Number is considered impractical. The purpose of this standard is to extend the application of some graphical symbols in ISO 15233 to the entire dental Areas, so these symbols and their source files are listed in this standard.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

ISO 639-1 Language name code Part 1. 2 letter code (Codesfortherepresentationofnamesoflan-guages-Part 1. Alpha-2code)

ISO 1942 Dentistry-Vocabulary

ISO 8601 data and exchange format information exchange date and time representation (Dataelementsandinterchangefor-mats-informationinterchange-Representationofdatesandtimes)

ISO 17724 Graphic Symbols Glossary (Graphicalsymbols-Vocabulary)

3 Terms and definitions

The terms and definitions defined in ISO 1942 and ISO 17724 apply to this document.

4 Requirements