YY/T 0246-2010Naso-pharyngeal biopsy forceps (English PDF)
鼻咽活体取样钳
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0246-2010 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
December 27, 2010
Implementation date
June 1, 2012
Scope
YY/T 0246-2010 is the English-translated version of 鼻咽活体取样钳.
YY/T 0246-2010 is the Chinese pharmaceutical industry standard for the naso-pharyngeal biopsy forceps, with which a specimen is taken from the nasopharynx.
It specifies the forms and the materials, the requirements, the test methods, the inspection rules, the marking and the rules for packaging, transport and storage, covering the dimensions and the cutting edges of the jaws, the cutting performance, the joint and the handle, the corrosion resistance and the surface finish. Issued on 27 December 2010, it applies from 1 June 2012.
Found what you need?
Document preview — YY/T 0246-2010
National Standard of the People's Republic of China
- ICS
- 11.040.30
- Classification
- C 31
- Replacing
- YY/T 0246-1996
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Form and materials
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard YY/T 0246-1996 "nasopharynx in vivo sampling clamp." This standard YY/T 0246-1996 the main differences.
--- Increasing the product in the form of live sampling clamp the nasopharynx and nasopharyngeal vivo sampling clamp plate and tube into two.
--- Cancellation head width dimension inspection, increase the head opening of inspection to ensure the quality of the organization cut bite.
--- No increase brightness requirements of the product.
--- Cancel the original standard egg-shaped finger ring size, allowing producers in accordance with YY/T 0173.4 "surgical instruments Lip Lip hook head gear head lock Dental egg-shaped stopper ring finger "in the egg-shaped ring finger regulations demand options.
1 Scope
This standard specifies the nasopharynx in vivo sampling clamp forms and materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the nasopharynx biopsy forceps for use in vivo sampling clamp nasopharynx (hereinafter referred to as biopsy forceps).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test method (GB/T 4340.1-2009, ISO 6507-1:2005, MOD)
GB/T 1220 stainless steel rods
GB/T 1910 newsprint
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 10610 Geometrical product specifications (GPS) Surface texture Profile method - Rules and procedures for evaluation of the surface structure (GB/T 10610-2009, ISO 4288:1996, IDT)
YY/T 0149 stainless steel medical equipment corrosion test methods (YY/T 0149-2006, ISO 13402:1995, MOD)
YY/T 1052 surgical instruments logo Symbols - Part 1 YY/T 0466.1 medical equipment used with medical device labels, labeling and information. General requirements (YY/T 0466.1-2009, ISO 15223-1:2007, IDT)
3 Form and materials
Forms and basic dimensions 3.1 biopsy forceps should conform to Figure 1, Figure 2 and Table 1 the provisions of.
a) straight round
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4340.1Metallic materials - Vickers hardness test - Part 1: Test method
- GB/T 1220Stainless steel bars
- GB/T 1910Newsprint
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 10610Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
Similar standards
Editions of YY/T 0246
| Edition | Title | Revision | Status |
|---|---|---|---|
| YY/T 0246-2010 | Naso-pharyngeal biopsy forceps | current edition | Current |
| YY/T 0246-1996 | Naso-pharyngeal biopsy forceps | previous edition | Superseded |
This page sells the current edition, YY/T 0246-2010. Earlier editions are listed for reference only.
How to Download YY/T 0246-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 1220-2007 — Stainless steel bars
GB/T 1910-2015 — Newsprint
Secure payment via Stripe
Payments accepted
YY/T 0246-2010
$165.00