YY/T 0190-2008Anoscope (English PDF)
肛门镜
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0190-2008 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
October 17, 2008
Implementation date
January 1, 2010
Scope
YY/T 0190-2008 is the English-translated version of 肛门镜.
YY/T 0190-2008 is the Chinese pharmaceutical industry standard for anoscopes used to examine the anus for lesions or during surgical treatment.
It covers three designs - cylindrical, two-bladed and three-bladed - with their types and basic dimensions, the materials, including stainless steel and drawn copper alloy tubes and rods, and the technical requirements for hardness, coating and corrosion resistance, with the corresponding test methods, the inspection rules, now including periodic inspection, and the marking, packaging, transport and storage.
It replaces YY/T 0190-1994, which dealt only with the cylindrical anoscope, and adds the two bladed designs. Issued on 17 October 2008, it has applied since 1 January 2010.
Found what you need?
Document preview — YY/T 0190-2008
National Standard of the People's Republic of China
- ICS
- 11.040.30
- Classification
- C 36
- Replacing
- YY/T 0190-1994
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
Foreword
Instead of the standard YY/T 0190-1994 "cylindrical mirror anal." Compared with the standard YY/T 0190-1994 The main changes are as follows.
--- Increased requirements and double-leaf clover anal anal mirror mirror;
--- The material product standard requirements included in the classification;
--- Inspection rules in increased cycle checkpoint.
The standard surgical instrument by the National Standardization Technical Committee and the focal point.
1 Scope
This standard specifies the classification, technical requirements, test methods, inspection rules anus mirror, signs, packaging, transportation and storage.
This standard applies to cylindrical, double-leaf clover anal mirror to check for anal lesions or surgical treatment available.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard. However, according to research encourages the parties to the agreement Study whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 230.1-2004 metal Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard Feet) (ISO 6508.1:1999, MOD)
GB/T 1220-2007 stainless steel rod
GB/T 1527-2006 Copper and copper alloy tube drawing
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1:1999, IDT)
GB/T 2829-2002 period inspection Sampling procedures and tables (suitable for process stability test)
GB/T 4423-2007 Copper and copper alloy rod drawing
GB/T 6463-2005 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003, IDT)
YY 0076-1992 metal parts coating technology classification conditions
YY/T 0149-2006 stainless steel medical equipment corrosion test methods (ISO 13402:1995, MOD)
YY/T 0171-2008 surgical instruments, packaging and marking and instructions for use
YY/T 1052-2004 mark surgical instruments
YY/T 91056-1999 medical device coating metal corrosion test assessment requirements
QB/T 1539-2005 and watch with brass band
3 Category
3.1 Types and basic dimensions
Anoscope anoscope comprises a cylindrical, double-leaf clover and the anoscope anoscope.
Types and basic dimensions shall comply with the provisions of the anoscope 1, Figure 2, Figure 3, Table 1 and Fig.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1-2004Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 1220-2007Stainless steel bars
- GB/T 1527-2006Drawn tube of copper and copper alloys
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 4423-2007Copper and copper alloy cold-drawn rod and bar
Editions of YY/T 0190
| Edition | Title | Revision | Status |
|---|---|---|---|
| YY/T 0190-2008 | Anoscope | current edition | Current |
| YY/T 0190-1994 | Anoscope | previous edition | Superseded |
This page sells the current edition, YY/T 0190-2008. Earlier editions are listed for reference only.
How to Download YY/T 0190-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1220-2007 — Stainless steel bars
GB/T 6463-2005 — Metallic and other inorganic coatings -- Review of methods of measurement of thickness
YY 0076-1992 — Coating classifications for metal product - Technical conditions
Secure payment via Stripe
Payments accepted
YY/T 0190-2008
$135.00