YY/T 0176-2006Surgical Scissors—General specifications (English PDF)

1 Scope

This standard specifies the materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of surgical scissor products.

This standard is applicable to point contact cutting and overlapping gill surgical scissors.

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

GB/T 230.1 Metallic Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (GB/T 230.1-2004, ISO 6508.1:1999, MOD)

GB/T 1220 Stainless steel wires (GB/T 1220-1992, neq JIS G4303:1988)

GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003, ISO 2859.1:1999, IDT)

GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)

YY/T 1052 Marking requirements for surgical instruments

YY/T 0149-2006 Medical instruments of stainless steel - Test methods of corrosion resistance (ISO 13401:1995, MOD)

3 Materials

Surgical scissors shall be made of 2Cr13, 2Cr13Mo, 4Cr13, 3Cr13Mo as specified in GB/T 1220, or other materials that meet the requirements of Clause 4.

4 Requirements