YS/T 575.2-2026Chemical analysis methods of bauxite ores - Part 2: Determination of silicon dioxide content (English PDF)
铝土矿石化学分析方法 第2部分:二氧化硅含量的测定
Also coversYS/T575.2-2026 + YST575.2-2026
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YS/T 575.2-2026 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
June 1, 2026
Implementation date
December 1, 2026
Scope
YS/T 575.2-2026 is the English-translated version of 铝土矿石化学分析方法 第2部分:二氧化硅含量的测定.
Part 2 of the series on chemical analysis of bauxite ores describes the determination of silicon dioxide content by the molybdenum blue spectrophotometric method and by the gravimetric-molybdenum blue spectrophotometric method. It applies to silicon dioxide in bauxite ores. The molybdenum blue method covers 0.25% to 25.00% by mass fraction, and the gravimetric-molybdenum blue method covers 15.00% to 50.00%. Where the two ranges overlap, the gravimetric-molybdenum blue method is the referee method.
It is used by bauxite mines and traders, by alumina refineries, and by analytical and inspection laboratories. It is voluntary, as the /T in the code shows. It was approved by the Ministry of Industry and Information Technology, issued on 1 June 2026 and takes effect on 1 December 2026. It replaces YS/T 575.2-2007 and YS/T 575.3-2007.
Found what you need?
Document preview — YS/T 575.2-2026
National Standard of the People's Republic of China
- ICS
- 73.060.40
- Classification
- D41
- Replacing
- YS/T 575.2-2007; YS/T 575.3-2007
Issued by: Ministry of Industry and Information Technology
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
YS/T 575.2-2026 is a recommended industry standard of the People's Republic of China in the Nonferrous Metals sector, approved and issued by the Ministry of Industry and Information Technology on 1 June 2026, with effect from 1 December 2026.
This edition replaces YS/T 575.2-2007; YS/T 575.3-2007.
Classification: ICS 73.060.40; CCS D41.
1 Scope
Part 2 of the series on chemical analysis of bauxite ores describes the determination of silicon dioxide content by the molybdenum blue spectrophotometric method and by the gravimetric-molybdenum blue spectrophotometric method. It applies to silicon dioxide in bauxite ores. The molybdenum blue method covers 0.25% to 25.00% by mass fraction, and the gravimetric-molybdenum blue method covers 15.00% to 50.00%. Where the two ranges overlap, the gravimetric-molybdenum blue method is the referee method.
It is used by bauxite mines and traders, by alumina refineries, and by analytical and inspection laboratories. It is voluntary, as the /T in the code shows. It was approved by the Ministry of Industry and Information Technology, issued on 1 June 2026 and takes effect on 1 December 2026. It replaces YS/T 575.2-2007 and YS/T 575.3-2007.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of YS/T 575.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| YS/T 575.2-2026 | Chemical analysis methods of bauxite ores - Part 2: Determination of silicon dioxide content | current edition | Current |
| YS/T 575.2-2007 | Chemical analysis methods of bauxite ores - Part 2: Determination of silicon dioxide content | previous edition | In force until 1 December 2026 |
| YS/T 575.3-2007 | Chemical analysis methods of bauxite ores - Part 2: Determination of silicon dioxide content | previous edition | In force until 1 December 2026 |
This page sells the current edition, YS/T 575.2-2026. Earlier editions are listed for reference only.
How to Download YS/T 575.2-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YS/T 575.1-2007 — Methods for chemical analysis of bauxite - Part 1: Determination of aluminium oxide content - EDTA titrimetric method
YS/T 575.1-2026 — Chemical analysis methods of bauxite ores - Part 1: Determination of aluminium oxide content - EDTA titration method
YS/T 575.10-2007 — Methods for chemical analysis of bauxite. Part10: Determination of manganese oxide content. Flame atomic absorption spectrophotometric method
Secure payment via Stripe
Payments accepted
YS/T 575.2-2026
$225.00