YS/T 1047.13-2020Methods for chemical analysis of copper magnetite - Part 13: Determination of mercury content Direct determination of solid sampling and cold atomic absorption spectrometry (English PDF)
铜磁铁矿化学分析方法 第13部分:汞含量的测定 固体进样直接测定法和冷原子吸收光谱法
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for YS/T 1047.13-2020 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2020
Implementation date
October 1, 2020
Scope
YS/T 1047.13-2020 is the English-translated version of 铜磁铁矿化学分析方法 第13部分:汞含量的测定 固体进样直接测定法和冷原子吸收光谱法.
YS/T 1047.13-2020 is the Chinese standard "Methods for chemical analysis of copper magnetite - Part 13: Determination of mercury content Direct determination of solid sampling and cold atomic absorption spectrometry". It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YS/T 1047.13-2020
National Standard of the People's Republic of China
- ICS
- 73.060.10
- Classification
- D31
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 Groundwater Dynamic Observatory (dot) Layout of
- 5.1 General requirements for establishment
- 5.2 Observatory (point) of the principles laid
- 5.3 Layout observation point position selection
- 6 Observation wells Design and Construction
- 6.1 Classification observation hole and laid claim
- 6.2 Observation wells design and quality requirements
- 7 Inspection rules
- 8 Packaging, transportation, storage and accompanying documents
- 9 Order contents
1 Foreword
YS/T 1047.13-2020 was issued by Ministry of Industry and Information Technology on 16 April 2020 and has been in force since 1 October 2020.
It is one of 13 parts of the YS/T 1047 series.
The YS/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
YS/T 1047.13-2020 falls under ICS 73.060.10, in the field of mining and minerals.
This catalogue holds 140 other YS/T standards in that field.
In this catalogue, YS/T standards carry edition years from 1985 to 2026.
3 About this standard
Sector: Nonferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
Chinese original: about 10,120 characters
4 Related standards
Other parts of this standard:
YS/T 1047.1-2015 — Methods for chemical analysis of copper magnetite. Part 1: Determination of copper content. 2, 2-biquinoly spectrophotometric method and flame atomic absorption spectrometric method
YS/T 1047.2-2015 — Methods for chemical analysis of copper magnetite. Part 2: Determination of total iron content. Potassium dichromate titration methods
YS/T 1047.3-2015 — Methods for chemical analysis of copper magnetite. Part 3: Determination of copper and iron contents. Sodium hyposulfite titration
YS/T 1047.4-2015 — Part 4: Determination of sulfur content - High frequency combustion with infrared absorption method
YS/T 1047.5-2015 — Part 5: Determination of phosphorus content - Titrimetric method
YS/T 1047.6-2015 — Part 6�� Determination of copper, total iorn, silicon dioxide, alumina oxide, calcium oxide, magnesium oxide, titanium dioxide, manganese oxide and phosphorus contents - Wavelength dispersive X-ray fluore
YS/T 1047.7-2015 — Part 7: Determination of copper, manganese, aluminium, calcium, magnestium, titanium and phosphorus contents - Inductively coupled plasma atomic emission spectrometric method
YS/T 1047.8-2015 — Methods for chemical analysis of copper magnetite. Part 8: Determination of silicon dioxide content. Gravimetric method
YS/T 1047.9-2015 — Part 9: Determination of metallic iron content - Sulfosalicylic acid photometric method
YS/T 1047.10-2015 — Methods for chemical analysis of copper magnetite. Part 10: Determination of iron (II) oxide content. Potassium dichromate titration method
YS/T 1047.11-2015 — Part 11: Determination of magnet iron content - Potassium dichromate titration method
YS/T 1047.12-2020 — Part 12: Determination of sulfur content Inductively coupled plasma atomic emission spectrometry
Standards on related subjects:
GB/T 6730.1-2016 — Iron ores -- Preparation of pre-dried test samples for chemical analysis
GB/T 6730.10-2014 — Iron ores -- Determination of silicon content -- Gravimetric methods
SN/T 2262-2009 — Determination of aluminum||arsenic||calcium||copper||magnesium||manganese||phosphorus||lead||zincum in iron ores. Inductively coupled plasma atomic emission spectrometry
5 Classification and status
International classification (ICS): 73.060.10
Chinese Standard Classification (CCS): D 31
Prefix YS/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download YS/T 1047.13-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YS/T 1047.12-2020 — Methods for chemical analysis of copper magnetite - Part 12: Determination of sulfur content Inductively coupled plasma atomic emission spectrometry
YS/T 1047.11-2015 — Methods for chemical analysis of copper magnetite - Part 11: Determination of magnet iron content - Potassium dichromate titration method
YS/T 1047.10-2015 — Methods for chemical analysis of copper magnetite. Part 10: Determination of iron (II) oxide content. Potassium dichromate titration method
YS/T 1047.13-2020
$180.00