YS/T 1047.12-2020Methods for chemical analysis of copper magnetite - Part 12: Determination of sulfur content Inductively coupled plasma atomic emission spectrometry (English PDF)
铜磁铁矿化学分析方法 第12部分:硫含量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for YS/T 1047.12-2020 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2020
Implementation date
October 1, 2020
Scope
YS/T 1047.12-2020 is the English-translated version of 铜磁铁矿化学分析方法 第12部分:硫含量的测定 电感耦合等离子体原子发射光谱法.
YS/T 1047.12-2020 is the Chinese standard "Methods for chemical analysis of copper magnetite - Part 12: Determination of sulfur content Inductively coupled plasma atomic emission spectrometry".
This standard specifies the method for the determination of sulfur content in copper magnetite. This standard applies to the determination of sulfur content in copper magnetite.
Measurement range: 0.50%~7.00%. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YS/T 1047.12-2020
National Standard of the People's Republic of China
- ICS
- 73.060.10
- Classification
- D31
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 Groundwater Dynamic Observatory (dot) Layout of
- 5.1 General requirements for establishment
- 5.2 Observatory (point) of the principles laid
- 5.3 Layout observation point position selection
- 6 Observation wells Design and Construction
- 6.1 Classification observation hole and laid claim
- 6.2 Observation wells design and quality requirements
- 7 Inspection rules
- 8 Packaging, transportation, storage and accompanying documents
- 9 Order contents
1 Foreword
YS/T 1047.12-2020 was issued by Ministry of Industry and Information Technology on 16 April 2020 and has been in force since 1 October 2020.
It is one of 13 parts of the YS/T 1047 series.
The YS/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the method for the determination of sulfur content in copper magnetite. This standard applies to the determination of sulfur content in copper magnetite. Measurement range: 0.50%~7.00%.
YS/T 1047.12-2020 falls under ICS 73.060.10, in the field of mining and minerals.
This catalogue holds 140 other YS/T standards in that field.
In this catalogue, YS/T standards carry edition years from 1985 to 2026.
3 About this standard
Sector: Nonferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
Chinese original: about 6,630 characters
4 Related standards
Other parts of this standard:
YS/T 1047.1-2015 — Methods for chemical analysis of copper magnetite. Part 1: Determination of copper content. 2, 2-biquinoly spectrophotometric method and flame atomic absorption spectrometric method
YS/T 1047.2-2015 — Methods for chemical analysis of copper magnetite. Part 2: Determination of total iron content. Potassium dichromate titration methods
YS/T 1047.3-2015 — Methods for chemical analysis of copper magnetite. Part 3: Determination of copper and iron contents. Sodium hyposulfite titration
YS/T 1047.4-2015 — Part 4: Determination of sulfur content - High frequency combustion with infrared absorption method
YS/T 1047.5-2015 — Part 5: Determination of phosphorus content - Titrimetric method
YS/T 1047.6-2015 — Part 6�� Determination of copper, total iorn, silicon dioxide, alumina oxide, calcium oxide, magnesium oxide, titanium dioxide, manganese oxide and phosphorus contents - Wavelength dispersive X-ray fluore
YS/T 1047.7-2015 — Part 7: Determination of copper, manganese, aluminium, calcium, magnestium, titanium and phosphorus contents - Inductively coupled plasma atomic emission spectrometric method
YS/T 1047.8-2015 — Methods for chemical analysis of copper magnetite. Part 8: Determination of silicon dioxide content. Gravimetric method
YS/T 1047.9-2015 — Part 9: Determination of metallic iron content - Sulfosalicylic acid photometric method
YS/T 1047.10-2015 — Methods for chemical analysis of copper magnetite. Part 10: Determination of iron (II) oxide content. Potassium dichromate titration method
YS/T 1047.11-2015 — Part 11: Determination of magnet iron content - Potassium dichromate titration method
YS/T 1047.13-2020 — Part 13: Determination of mercury content Direct determination of solid sampling and cold atomic absorption spectrometry
Standards on related subjects:
GB/T 6730.1-2016 — Iron ores -- Preparation of pre-dried test samples for chemical analysis
GB/T 6730.10-2014 — Iron ores -- Determination of silicon content -- Gravimetric methods
SN/T 2262-2009 — Determination of aluminum||arsenic||calcium||copper||magnesium||manganese||phosphorus||lead||zincum in iron ores. Inductively coupled plasma atomic emission spectrometry
5 Classification and status
International classification (ICS): 73.060.10
Chinese Standard Classification (CCS): D 31
Prefix YS/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download YS/T 1047.12-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YS/T 1047.13-2020 — Methods for chemical analysis of copper magnetite - Part 13: Determination of mercury content Direct determination of solid sampling and cold atomic absorption spectrometry
YS/T 1047.11-2015 — Methods for chemical analysis of copper magnetite - Part 11: Determination of magnet iron content - Potassium dichromate titration method
YS/T 1047.10-2015 — Methods for chemical analysis of copper magnetite. Part 10: Determination of iron (II) oxide content. Potassium dichromate titration method
YS/T 1047.12-2020
$125.00