SN/T 4238.4-2015Admissibility of inspection results for import and export industrial products - Part 4: Management of the third party inspection institution (English PDF)

Foreword

SN/T 4238 "Import and Export Industrial Products Inspection Results Lettering" is divided into four parts.

--- Part 1. General;

--- Part 2. Quality and Safety Qualification Guarantee;

--- Part 3. Quality and safety compliance assessment;

--- Part 4. Managed by the organization.

This part is part 4 of SN/T 4238 this part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part is proposed and managed by the National Certification and Accreditation Administration.

This section drafted by. Shanghai Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Beijing Entry-Exit Inspection and Quarantine Bureau, Zhuhai Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.

Introduction

In order to ensure the quality and safety of import and export industrial products, strengthen the main responsibility of the import and export of industrial products for the quality and safety of products, and encourage Third-party inspection agencies actively participate in the statutory inspection of import and export industrial products, standardize the acceptance of inspection results of import and export industrial products, and promote Into the development of foreign economic and trade, the development of this series of standards.

Import and export industrial product inspection results Part 4. Management by the credit bureau

1 Scope

This part of SN/T 4238 stipulates that third-party inspection agencies and related party inspection agencies apply for the corporate information disclosure of the credited institutions.

The requirements, procedures, and entry-exit inspection and quarantine institutions (hereinafter referred to as inspection and quarantine institutions) implement the corporate information disclosure tube for the adopted institutions.

Rational supervision and management requirements.

This part applies to the inspection and quarantine institutions to carry out enterprise information disclosure management, daily supervision and management and exit mechanism.

The volume safety supervision work may also be used as a third-party inspection agency and related party inspection agency in the work of inspection and appraisal of import and export commodities.

The industry self-discipline basis for compliance.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

SN/T 4238.1 Inspection results of import and export industrial products - Part 1. General ISO/IEC 17020 Inspection Authority Accreditation Guidelines (AccreditationCriteriafortheCompletenceofInspection Bodies) General requirements for the capabilities of ISO/IEC 17025 inspection and calibration laboratories (GeneralRequirementsforthe CompetenceofTestingandCalibrationLaboratories)

3 Terms and definitions

The terms and definitions defined by SN/T 4238.1 apply to this document.

4 General requirements

The inspection and quarantine institution shall, in accordance with the requirements of this part, implement the management of enterprise information disclosure, including the review, release and change of the adopted organization.

The public information materials submitted by the tripartite inspection agencies or related party inspection agencies shall be subject to daily supervision and management of the credited institutions.

mechanism.

The adopted organization shall submit or change the information disclosure materials of the enterprise to the inspection and quarantine institution in accordance with the requirements of this part, and cooperate with the inspection and quarantine machine.

To implement supervision and management, and accept public supervision to ensure that its inspection results can be used as a quality and safety conformity assessment for import and export industrial products.

The basis for the evaluation.

5 Enterprise Information Publicity Management