SN/T 2298.4-2009Inspection and quarantine general standard for imported solid wastes as raw materials. Part 4: Inspection of explosive substances (English PDF)

Foreword

"Imported solid wastes as raw materials inspection and quarantine of the General Standard" SN/T 2298 is divided into four parts.

--- Part 1. Terms and definitions;

--- Part 2. Sampling methods;

--- Part 3. sanitation disposition of common technical requirements;

--- Part 4. test methods for explosive substances.

This section "imported solid wastes as raw materials inspection and quarantine of the General Standard" series of standards Part 4.

This section of the Appendix A, Appendix B is an informative annex.

This part is proposed by the State Administration of Quality Supervision, Inspection and Quarantine.

The section under the jurisdiction of the State Certification and Accreditation Administration Committee.

This section is drafted. Tianjin Entry-Exit Inspection and Quarantine, Zhejiang, Jiangsu Inspection and Quarantine Bureau.

1 Scope

This section SN/T 2298 specifies the method for determining the initial import of solid wastes as raw materials in the explosive substances and general inspection Test methods.

This section applies to solid waste imported used as raw materials in the preliminary determination and the general test methods for explosive substances.

2 Normative references

The following documents contain provisions which, through reference SN/T 2298 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB 14371 Transport of Dangerous Goods explosives acceptance and classification procedures and fitting requirements, GB/T 14372 Transport of Dangerous Goods explosives recognition, sub-test method and criteria SN/T 2298.1 imported solid wastes as raw materials inspection and quarantine of the General Standard - Part 1. Terms and definitions

3 Terms and Definitions

SN/T 2298.1 and established in the following terms and definitions apply to this section.

Through its own chemical reaction, or in some external pressure, temperature effects on the environment caused damage to a substance or article (or Mixtures of these substances).

4 Category, explosive substance

4.1 The main sources of imported waste materials for explosive substances.

1) unstable and prone to dramatic changes in the absence of knocking waste.

2) can form explosive mixtures with water.

3) through heat, moisture, spontaneous chemical changes have ignition propensity waste.

4) When posing a heating source capable of detonation or explosion or waste.

4.2 explosive or hazardous components of waste. Common hazardous waste or component name in Appendix A.

4.3 Explosive arms and ammunitions and explosive materials. Common types are. bullets, shells, rocket bombs, grenades, special bombs, explosive devices and to Aerial bombs.

4.4 Other explosive substances.

5 Test methods and determination

Warning. Use of practical experience in this part of the staff should have regular work. This section does not indicate a possible security problem. Users are responsible for any appropriate security precautions and to ensure compliance with the provisions of the relevant national regulatory documents.