SN/T 1589.6-2006Rules for the inspection of household and similar electrical appliances for import and export. Part 6: Sewing machine (English PDF)

Foreword

SN/T 1589 "Import and Export Household and Similar Electrical Appliances Inspection Regulations" is divided into eight parts.

--- Part 1. General requirements;

---Part 2. Vacuum cleaners and water-absorbent cleaners;

--- Part 3. Storage water heaters;

--- Part 4. Radiant heaters;

--- Part 5. Humidifier;

---Part 6. Sewing machine;

---Part 7. Air purifiers;

--- Part 8. Massage apparatus.

This part is the sixth part of SN/T 1589 "Inspection Procedures for Import and Export Household and Similar Electrical Appliances".

This part is proposed and managed by the National Certification and Accreditation Administration.

This section drafted by. Zhuhai Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.

Introduction

The "Import and Export Household and Similar Electrical Appliances Inspection Procedures" is the basis for the inspection of import and export household and similar electrical appliances.

Household and similar electrical appliances are used for guidance and regulation.

With the amendment of China's accession to the World Trade Organization (WTO) and the "Import and Export Commodity Inspection Law of the People's Republic of China", import and export commodity inspection the inspection work pattern has undergone great changes. In order to adapt to the situation and changes, the national inspection and quarantine authorities have established inspection and quarantine standards.

system.

This part belongs to the fourth layer of the inspection and quarantine standard system (the third layer of the electromechanical inspection professional standard system)---personality standard, for household electricity the characteristics of the sewing machine stipulate the special requirements for the inspection of electric sewing machines for import and export.

Import and export household and similar electrical appliances inspection procedures Part 6. Sewing machine

1 Scope

This section specifies the sampling, inspection and inspection results of the import and export household electric sewing machine.

This section applies to the inspection of household electric sewing machines.

2 Normative references

The provisions in the following documents become the provisions of this part by reference to this part of SN/T 1589. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.

GB 1002-1996 Single phase plugs and sockets for household and similar purposes, basic parameters and dimensions GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) Plan (ISO 2859-1:1999, IDT) GB 4706.1-1998 Safety of household and similar electrical appliances Part 1. General requirements (eqv IEC 60335-1:1991) GB 4706.74-2004 Safety requirements for safety sewing machines for household and similar electrical appliances (IEC 60335-2-28:1994, IDT) GB 5296.2-1999 Instructions for use of consumer goods Instructions for use of household and similar electrical appliances IEC 60335-1:2001 Safety of household and similar electrical appliances - Part 1. General requirements UL60335-1.2002 Safety of household and similar electrical appliances - Part 1. General requirements Basic requirements for the preparation of SN/T 0002 import and export electromechanical commodity inspection procedures

3 Definition

The terms and definitions established by SN/T 0002 and the following terms apply to this section.

The import inspection batch refers to the same type of product collected under the same contract and the same (transport) order; the export inspection batch refers to the inspection the same specifications, models, and products produced in the same unit are collected. Referred to as a batch.

It is powered by mains, is portable, has no rack, and can be placed on a sewing machine used on a general platform.

4 Inspection