GB/T — National Recommended
Found: 76458 — page 1124 of 1593
PDF
GB/T 16895.24-2005 — Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations
National·Recommended
Superseded$495.00
PDF
GB/T 16895.25-2005 — Electrical installations of buildings - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands
National·Recommended
Superseded$210.00
PDF
GB/T 16896.1-2005 — Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
National·Recommended
Superseded$495.00
26 pages
GB/T 16921-2005 — Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
National·Recommended
Valid$155.00
PDF
GB/T 16935.3-2005 — Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
National·Recommended
Superseded$300.00
10 pages
GB/T 1695-2005 — Rubber, vulcanized - Determination of electrical breakdown strength and voltage resistant at commercial power frequency
National·Recommended
Valid$145.00
PDF
GB/T 16977-2005 — Industrial robots - Coordinate systems and motion nomenclatures
National·Recommended
Superseded$125.00
PDF
GB/T 17049-2005 — All-glass evacuated solar collector tubes
National·Recommended
Superseded$240.00
PDF
GB/T 17213.10-2005 — Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
National·Recommended
Superseded$145.00
4 pages
GB/T 17213.11-2005 — Industrial-process control valves -- Part 3-2: Dimensions -- Face to face dimensions for rotary control valves except butterfly valves
National·Recommended
Valid$100.00
4 pages
GB/T 17213.12-2005 — Industrial-process control valves -- Part 3-3: Dimensions -- End dimensions for buttweld, two-way, globe-type, straight pattern control valves
National·Recommended
Valid$85.00
4 pages
GB/T 17213.13-2005 — Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to valves -- Positioner mounting on rotary actuators
National·Recommended
Valid$95.00
PDF
GB/T 17213.14-2005 — Industrial-process control valves - Part 8-2: Noise considerations - Laboratory of noise generated by hydrodynamic flow through control valves
National·Recommended
Superseded$235.00
PDF
GB/T 17213.15-2005 — Industrial-process control valves - Part 8-3: Noise considerations - Control valves aerodynamic noise prediction method
National·Recommended
Superseded$590.00
PDF
GB/T 17213.16-2005 — Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
National·Recommended
Superseded$125.00
PDF
GB/T 17213.2-2005 — Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
National·Recommended
Superseded$510.00
6 pages
GB/T 17213.3-2005 — Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and center-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
National·Recommended
Valid$55.00
PDF
GB/T 17213.4-2005 — Industrial-process control valves - Part 4: Inspection and routine testing
National·Recommended
Superseded$105.00
10 pages
GB/T 17213.6-2005 — Industrial-process control valves -- Part 6-1: Mounting details for attachment of positioners to control valves -- Positioner mounting on linear actuators
National·Recommended
Valid$105.00
PDF
GB/T 17213.9-2005 — Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
National·Recommended
Superseded$165.00
7 pages
GB/T 17214.2-2005 — Operating conditions for industrial-process measurement and control equipment -- Part 2: Power
National·Recommended
Valid$115.00
9 pages
GB/T 17214.4-2005 — Operating conditions for industrial-process measurement and control equipment -- Part 4: Corrosive and erosive influence
National·Recommended
Valid$135.00
PDF
GB/T 17249.2-2005 — Acoustics - Guidelines for the design of low-noise workplaces - Part 2: Noise control measures
National·Recommended
Superseded$195.00
7 pages
GB/T 17453-2005 — Technical drawings -- General principles of presentation -- Basic conventions for representing areas on cuts and sections
National·Recommended
Valid$90.00
18 pages
GB/T 17532-2005 — Terminology work -- Computer applications -- Vocabulary
National·Recommended
Valid$225.00
PDF
GB/T 17564.1-2005 — Standard data element types with associated classification for electrical components - Part 1: Definitions - Principles and methods
National·Recommended
Superseded$740.00
PDF
GB/T 17564.2-2005 — Standard data element types with associated classification for electrical components - Part 2: EXPRESS dictionary schema
National·Recommended
Superseded$2,070.00
9 pages
GB/T 17626.14-2005 — Electromagnetic compatibility -- Testing and measurement techniques -- Voltage fluctuation immunity test
National·Recommended
Valid$125.00
8 pages
GB/T 17626.17-2005 — Electromagnetic compatibility - Testing and measurement techniques - Ripple on d.c. input power port immunity test
National·Recommended
Valid$95.00
7 pages
GB/T 17778-2005 — Determination of d-biotin in premix
National·Recommended
Valid$130.00
6 pages
GB/T 17902.2-2005 — Information technology -- Security techniques -- Digital signatures with appendix -- Part 2: Identity-based mechanisms
National·Recommended
Valid$135.00
12 pages
GB/T 17902.3-2005 — Information technology -- Security techniques -- Digital signatures with appendix -- Part 3: Certificate-based mechanisms
National·Recommended
Valid$285.00
PDF
GB/T 17951-2005 — Standard specification for magnetically hard materials
National·Recommended
Superseded$510.00
PDF
GB/T 17993-2005 — General requirements for the competence of automotive multiple - Function test station
National·Recommended
Superseded$235.00
18 pages
GB/T 18207.2-2005 — Terminology of protecting against and mitigating earthquake disasters--Part2:Special technical terms
National·Recommended
Valid$315.00
PDF
GB/T 18208.4-2005 — Post-earthquake field works - Part 4: Assessment of direct loss
National·Recommended
Superseded$540.00
15 pages
GB/T 18240.5-2005 — Fiscal cash register-Part 5:Specification of fiscal printer
National·Recommended
Valid$225.00
PDF
GB/T 18364.2-2005 — Filling receptacle of LPG vehicle - Part 2: Insert
National·Recommended
Withdrawn$319.00
PDF
GB/T 18385-2005 — Electric vehicles - Power performance - Test method
National·Recommended
Superseded$360.00
PDF
GB/T 18386-2005 — Electric vehicles - Energy consumption and range - Test procedures
National·Recommended
Superseded$75.00
13 pages
GB/T 18388-2005 — Electric vehicles - Engineering approval evaluation program
National·Recommended
Valid$35.00
6 pages
GB/T 18496.2-2005 — Electromechanical switches for use in electronic equipment -- Part 4-1: Sectional specification for lever (toggle) switches -- Blank detail specification
National·Recommended
Valid$70.00
PDF
GB/T 18570.10-2005 — Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 10: Field method for the titrimetric determination of water-soluble chloride
National·Recommended
Withdrawn$55.00
7 pages
GB/T 18570.3-2005 — Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
National·Recommended
Valid$95.00
4 pages
GB/T 18570.5-2005 — Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on surfaces prepared for painting (ion detection tube method)
National·Recommended
Valid$80.00
PDF
GB/T 18570.6-2005 — Steel substrates before application of paints and Tests for the assessment of surface cleanliness - Part 6: soluble impurities sampling Bresle law
National·Recommended
Superseded$155.00
PDF
GB/T 18570.8-2005 — Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture
National·Recommended
Withdrawn$80.00
PDF
GB/T 18570.9-2005 — Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the conductometric determination of water-soluble salts
National·Recommended
Superseded$55.00