Valid

RB/T 085-2022Requirements for metrological traceability of measurement results (English PDF)

测量结果的计量溯源性要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for RB/T 085-2022 in 30 minutes.

Issued by

National Certification and Accreditation Administration

Level / Type

National · Recommended

Issue date

October 11, 2022

Implementation date

January 1, 2023

Scope

RB/T 085-2022 is the English-translated version of 测量结果的计量溯源性要求.

RB/T 085-2022 — This document specifies the relevant requirements for metrological traceability of measurement results, including general requirements, traceability scope, traceability organization, traceability results and traceability: Source cycle and other requirements: This document is applicable to inspection and testing bodies, calibration laboratories, proficiency testing providers, standards Substance/standard sample producers, biobanks and other conformity assessment institutions (hereinafter referred to as "conformity assessment institutions") establish and certify the measurement results Metrological traceability: Note: Measuring equipment in this document includes measuring instruments, software, measurement standards, reference materials, reference data, reagents, consumables or auxiliary devices, etc:

Found what you need?

Document preview — RB/T 085-2022

National Standard of the People's Republic of China

ICS
03.120.20
Classification
A 00

Issued by: National Certification and Accreditation Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting:

Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:

1 Scope

This document specifies the relevant requirements for metrological traceability of measurement results, including general requirements, traceability scope, traceability organization, traceability results and traceability:

Source cycle and other requirements:

This document is applicable to inspection and testing bodies, calibration laboratories, proficiency testing providers, standards Substance/standard sample producers, biobanks and other conformity assessment institutions (hereinafter referred to as "conformity assessment institutions") establish and certify the measurement results Metrological traceability:

Note: Measuring equipment in this document includes measuring instruments, software, measurement standards, reference materials, reference data, reagents, consumables or auxiliary devices, etc:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references for documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document:

JJF1001 General Metrology Terms and Definitions ISO/IEC Guide 99 International vocabulary of metrology, basic and common concepts and related terms (VIM) (International

3 Terms and Definitions

The following terms and definitions defined in JJF1001 and ISO/IEC Guide 99 apply to this document:

The uninterrupted calibration chain specified by the document, the characteristics of the measurement results that relate the measurement results to the reference object, the calibration chain Every calibration introduces measurement uncertainty:

Note 1: The reference object in this definition can be the definition of the actual realization of the measurement unit, or the measurement procedure including the measurement unit of the disordered quantity, or the measurement standard:

Note 2: Metrological traceability requires the establishment of a calibration level sequence:

Note 3: The technical specification of the reference object must include the time when the reference object is used in establishing the grade sequence, as well as the metrological information about the reference object, as in the time of the first calibration in this calibration hierarchy sequence:

Note 4: For measurements with more than one input quantity in the measurement model, the value of each input quantity itself should be metrologically traceable, and the calibration level sequence Columns can form a branching structure or network: Efforts to establish metrological traceability for each input quantity should be commensurate with the contribution to the measurement result:

Note 5: The metrological traceability of the measurement results cannot guarantee that the measurement uncertainty meets the given purpose, nor can it guarantee that errors will not occur:

Note 6: If the comparison of two measurement standards is used for checking, if necessary, for the correction of the value, and to assign measurement uncertainty to one of the measurement standards During calibration, the comparison between measurement standards can be regarded as a kind of calibration:

Note 7: The comparison between two measurement standards, if used to check one of the measurement standards and correct the value if necessary, and give the measurement uncertainty degree, it can be regarded as a calibration:

Note 8: The abbreviation "traceability" sometimes refers to "measurement traceability", and sometimes refers to other concepts, such as "sample traceability", "document traceability", "instrument traceability "Traceability" or "Material Traceability", etc:, which mean the history ("trajectory") of an item: Therefore, when there is a risk of confusion, it is better to use the full term "Metrometric traceability":

[Source: JJF1001-2011,4:14]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

How to Download RB/T 085-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

RB/T 085-2022

$150.00