RB/T 034-2020Guidelines for determining and adjusting the calibration period of measuring equipment (English PDF)
测量设备校准周期的确定和调整方法指南
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for RB/T 034-2020 in 30 minutes.
Issued by
National Certification and Accreditation Administration
Level / Type
National · Recommended
Issue date
August 26, 2020
Implementation date
December 1, 2020
Scope
RB/T 034-2020 is the English-translated version of 测量设备校准周期的确定和调整方法指南.
RB/T 034-2020 — This standard provides the determination of the measurement equipment (equipment for short) that needs to be calibrated, the method for determining the initial calibration period of the equipment, and the subsequent calibration of the equipment Method and application example of period adjustment: This standard applies to all institutions that need to determine and adjust the calibration cycle of their measuring equipment: Note: Institutions refer to testing laboratories, calibration laboratories, inspection institutions, reference material producers, proficiency testing providers, medical laboratories, etc:, collectively referred to as "institutions" below:
Found what you need?
Document preview — RB/T 034-2020
National Standard of the People's Republic of China
- Classification
- A 00
Issued by: National Certification and Accreditation Administration
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 4 Determination of calibration equipment
- 5 Determination of the initial calibration period of the equipment
- 6 Adjustment of subsequent calibration cycle of equipment
1 Foreword
RB/T 034-2020 was issued by National Certification and Accreditation Administration on 26 August 2020 and has been in force since 1 December 2020.
The RB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 11 pages in English translation.
2 Scope Preview
This standard provides the determination of the measurement equipment (equipment for short) that needs to be calibrated, the method for determining the initial calibration period of the equipment, and the subsequent calibration of the equipment Method and application example of period adjustment: This standard applies to all institutions that need to determine and adjust the calibration cycle of their measuring equipment: Note: Institutions refer to testing laboratories, calibration laboratories, inspection institutions, reference material producers, proficiency testing providers, medical laboratories, etc:, collectively referred to as "institutions" below:
RB/T 034-2020 is filed under Chinese Standard Classification A 00, in the field of general, standardization and metrology.
This catalogue holds 54 other RB/T standards without an ICS number.
In this catalogue, RB/T standards carry edition years from 2013 to 2026.
3 Normative references
ISO/IEC 17025
4 About this standard
Issued by: National Certification and Accreditation Administration
English translation: about 11 pages
Chinese original: about 14,160 characters
5 Related standards
Standards on related subjects:
RB/T 033-2020 — Guidance on verification and validation of microbiological testing methods
RB/T 030-2020 — Guidance of quantifying measurement uncertainty in chemical analysis
RB/T 029-2020 — Guidelines for the Construction of Testing Laboratory Information Management System
RB/T 028-2020 — Laboratory information management system management specifications
6 Classification and status
Chinese Standard Classification (CCS): A 00
Prefix RB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
Referenced standards
Normative references
ISO/IEC 17025
How to Download RB/T 034-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
RB/T 132-2026 — Guidelines for the digital development of inspection and testing agencies
RB/T 133-2026 — Certification review of automotive chip organizations—General evaluation requirements
RB/T 134-2026 — Automotive chip design organizations—Guidelines for evaluation of basic capability
RB/T 034-2020
$225.00