Valid

QC/T 810-2009Specifications for solenoid switches of automotive starters (English PDF)

汽车起动机用电磁开关技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 810-2009 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 17, 2009

Implementation date

April 1, 2010

Scope

QC/T 810-2009 is the English-translated version of 汽车起动机用电磁开关技术条件.

QC/T 810-2009 is the Chinese standard "Specifications for solenoid switches of automotive starters". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of solenoid switch for automobile starters.

This standard is applicable to the solenoid switch for automobile starters (hereinafter referred to as solenoid switch). Its clauses include requirements.

Found what you need?

Document preview — QC/T 810-2009

National Standard of the People's Republic of China

ICS: 43.040.10

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword i
1 Scope
2 Normative references
3 Requirements
4 Test methods
5 Inspection rules
6 Marking, packaging, transportation and storage

1 Scope

This standard specifies the requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of solenoid switch for automobile starters.

This standard is applicable to the solenoid switch for automobile starters (hereinafter referred to as solenoid switch).

2 Normative references

The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition applies.

QC/T 413-2002 Basic specifications for automotive electrical equipment

QC/T 731-2005 Automotive starting motor specification

GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

3 Requirements

3.1 General requirements

The solenoid switch shall meet the requirements of this standard and shall be manufactured according to the drawings and technical documents approved through established procedure.

3.2 Materials

The materials for solenoid switch shall meet the corresponding material standards and customer requirements. All materials shall not contain asbestos or metal cadmium, and should not contain mercury, lead or hexavalent chromium.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 4942.1-2006

Similar standards

QC/T 978-2014|QC/T 1005-2015|QC/T 1006-2015|GB/T 35175-2017|QC/T 198-2014|QC/T 427-2013

How to Download QC/T 810-2009

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.