QC/T 718-2004Concrete pump trucks (English PDF)
混凝土泵车
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for QC/T 718-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2004
Implementation date
April 1, 2005
Scope
QC/T 718-2004 is the English-translated version of 混凝土泵车.
QC/T 718-2004 is the Chinese automotive industry standard covering concrete pump trucks. It was issued on 20 October 2004 and has been in force since 1 April 2005, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2004 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 718-2004
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 3.2 Abbreviations
- 4 Technical Requirements
- 4.1 Arrangement form
- 5 Test Methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection Rules
- 6.1 Test environment
- 7 Product Plate
- 8 Operation Instruction
- 9 Accompanied Documents, Packaging, Transportation and Storage
1 Foreword
QC/T 718-2004 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 October 2004 and has been in force since 1 April 2005.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 18 pages in English translation.
2 Scope Preview
This standard specifies terms and definitions, technical requirements, test methods, inspection rules, product plate, operating instructions as well as accompanied documents, packaging, transportation and storage of the truck mounted concrete pump. This standard is applicable to modified truck mounted concrete boom pump by adopting approved Category II automobile chassis; and the truck mounted concrete line pump complies with it through reference.
QC/T 718-2004 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 18 pages
4 Related standards
Other editions:
QC/T 718-2013 (later edition)
Standards on related subjects:
GB 24407-2025 — Safety technical specifications of special school bus
QC/T 911-2023 — Power supply vehicles
NB/T 10354-2019 — Tube trailer
QC/T 849-2023 — Stage vehicles
QC/T 254-2019 — Cash-in-transit vehicles
5 Classification and status
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Similar standards
How to Download QC/T 718-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 718-2004
$255.00