QC/T 715-2004Test method for friction coefficient of automotive threaded joints (English PDF)
汽车用螺纹连接副摩擦系数的测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 715-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2004
Implementation date
April 1, 2005
Scope
QC/T 715-2004 is the English-translated version of 汽车用螺纹连接副摩擦系数的测试方法.
QC/T 715-2004 is the Chinese standard "Test method for friction coefficient of automotive threaded joints". Its scope clause reads: This standard specifies the measuring method for friction coefficient of screw thread pair of automobiles.
This standard is applicable to measure the friction coefficient of bolt-nut screw thread pair of automobiles by using special automatic operation test devices. Its clauses include test conditions.
Found what you need?
Document preview — QC/T 715-2004
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope 1
- 2 Normative references 1
- 3 Test conditions 1
- 4 Test devices 2
- 5 Standard backing plate for test 2
- 6 Measuring method for friction coefficient 2
- 7 Test results 2
1 Scope
This standard specifies the measuring method for friction coefficient of screw thread pair of automobiles.
This standard is applicable to measure the friction coefficient of bolt-nut screw thread pair of automobiles by using special automatic operation test devices.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 16823.3 Method of tightening test for threaded fasteners (eqv JIS B1084: 1987)
3 Test conditions
3.1
The surface of the test piece shall be clean and free of lubricating medium, and each test piece can only be used once. The standard backing plate for test can be reused only after being processed to meet the requirements of clause 5.
3.2
Bolts matched with test piece nuts and nuts matched with test piece bolts shall not have surface coating, and the surface shall be clean and free of lubricating medium.
3.3 The ambient temperature of test
23°C±5°C.
3.4 The ambient humidity of test
65%±10%.
3.5
The screw engagement length of steel nuts shall be greater than or equal to the nominal diameter of thread + pitch.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download QC/T 715-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 715-2004
$85.00