QC/T 258-2013Vehicle wheels - Nut seat strength test (English PDF)
汽车车轮 螺母座强度试验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 258-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
QC/T 258-2013 is the English-translated version of 汽车车轮 螺母座强度试验.
QC/T 258-2013 is the Chinese standard "Vehicle wheels - Nut seat strength test". Its scope clause reads: This standard specifies the test methods and performance requirements for the strength of the nut seat of vehicle wheels.
This standard is applicable to vehicle wheels with protruding nut seats. Its clauses include test procedures.
Found what you need?
Document preview — QC/T 258-2013
National Standard of the People's Republic of China
- Replacing
- QC/T 258-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Test procedures
- Annex A (Informative) Bearing surface recommendation
1 Scope
This standard specifies the test methods and performance requirements for the strength of the nut seat of vehicle wheels.
This standard is applicable to vehicle wheels with protruding nut seats.
2 Test procedures
2.1 General
The principle of this test is to apply an axial load to the nut seat and determine the permanent deformation of the nut seat. In addition, a test to measure the yield strength is also specified.
2.2 Wheels for test
Use only new wheels that have undergone the complete manufacturing process (including all coating processes) and have not been used.
2.3 Test equipment
The test equipment shall have a rigid flat surface which is dimensionally equal to the vehicle hub (see Figure 1) and is capable of supporting the complete wheel mounting area. The equipment shall provide a hardened (HRC 45 min) punch or load applicator with a shape designed to match the contour of the nut seat, with a contact area not less than the nut seat contact area specified for the wheel. The punch or load applicator shall provide a measured, non-rotational axial force of F perpendicular to the plane of the supporting surface. F shall depend on the type of fastener used to fix the wheel on the hub. Only one nut seat of a wheel shall be loaded at a time. In addition to the loading mechanism, devices to measure nut seat deformation or punch travel shall be required.
F—test load; H—measured height of nut seat; 1—punch; 2—nut seat; 3—supporting surface
Figure 1 Load applicator schematic
2.4 Strength test procedures
2.4.1 Deformation test
2.4.1.1 Procedure
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of QC/T 258
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 258-2013 | Vehicle wheels - Nut seat strength test | current edition | Current |
| QC/T 258-1998 | Vehicle wheels - Nut seat strength test | previous edition | Superseded |
This page sells the current edition, QC/T 258-2013. Earlier editions are listed for reference only.
How to Download QC/T 258-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 258-2013
$170.00