QC/T 222-2010General specifications for dump trucks (English PDF)
自卸汽车通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 222-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 16, 2010
Implementation date
December 1, 2010
Scope
QC/T 222-2010 is the English-translated version of 自卸汽车通用技术条件.
QC/T 222-2010 is the Chinese automotive industry standard covering general specifications for dump trucks. It was issued on 16 August 2010 and has been in force since 1 December 2010, replacing QC/T 222-1997.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2010 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 222-2010
National Standard of the People's Republic of China
- Replacing
- QC/T 222-1997
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 4.1 Arrangement form
- 5 Test methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection rules
- 6.1 Test environment
- 7 Marks and accompanying documents
1 Foreword
QC/T 222-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 August 2010 and has been in force since 1 December 2010.
It replaces the earlier edition QC/T 222-1997.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
QC/T 222-2010 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
QC/T 222-2025 (later edition)
QC/T 222-1997 (earlier edition)
5 Classification and status
Chinese Standard Classification (CCS): T 51
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- QC/T 956-2013Dry-mixed mortar transport vehicles
- QC/T 223-2010Test methods for dump trucks
- QC/T 560-2010Bulk cement tankers - Technical specifications and performance test methods
- QC/T 825-2010Technical specifications for hydraulic systems of dump trucks
- QC/T 588-1999Evaluation method for quality inspection of dump trucks
Similar standards
Editions of QC/T 222
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 222-2010 | General specifications for dump trucks | current edition | Current |
| QC/T 222-1997 | General specifications for dump trucks | previous edition | Superseded |
This page sells the current edition, QC/T 222-2010. Earlier editions are listed for reference only.
How to Download QC/T 222-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 222-2010
$135.00