QC/T 206-1999Type approval test procedure for motorcycle and moped engines (English PDF)
摩托车和轻便摩托车发动机定型试验规程
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 206-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 9, 1999
Implementation date
January 1, 2000
Scope
QC/T 206-1999 is the English-translated version of 摩托车和轻便摩托车发动机定型试验规程.
QC/T 206-1999 is the Chinese automotive industry standard covering type approval test procedure for motorcycle and moped engines. It was issued on 9 August 1999 and has been in force since 1 January 2000, replacing QC/T 206-1995.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 206-1999
National Standard of the People's Republic of China
- Replacing
- QC/T 206-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 4.1 Arrangement form
- 5 Test Methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection Rules
- 6.1 Test environment
- 7 Signs, documents, packaging, transportation and storage
- 8 Inspection report
- 9 Marks, packaging
1 Foreword
QC/T 206-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 August 1999.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
QC/T 206-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 5363-2025 — Method of bench test of engine for motorcycles and mopeds
GB/T 20076-2021 — Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds
QC/T 793-2020 — Air filter for motorcycles and mopeds
QC/T 683-2024 — Cleanliness limits and measurement methods for motorcycle and moped engines
QC/T 686-2024 — Combined crankshaft and connecting rod assemblies for motorcycle and moped engines
QC/T 734-2024 — Technical requirements and test methods for sealing performance of motorcycle and moped engines
5 Classification and status
Chinese Standard Classification (CCS): T 81
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of QC/T 206
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 206-1999 | Type approval test procedure for motorcycle and moped engines | current edition | Current |
| QC/T 206-1995 | Type approval test procedure for motorcycle and moped engines | previous edition | Superseded |
This page sells the current edition, QC/T 206-1999. Earlier editions are listed for reference only.
How to Download QC/T 206-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 206-1999
$165.00