Valid

NB/T 20009.8-2012Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 8: Nickel-based Alloy Wires and Filler Rods for Classes 1, 2, 3 Components (English PDF)

压水堆核电厂用焊接材料 第8部分:1、2、3级设备用镍基合金焊丝和填充丝

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 20009.8-2012 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

January 6, 2012

Implementation date

April 6, 2012

Scope

NB/T 20009.8-2012 is the English-translated version of 压水堆核电厂用焊接材料 第8部分:1、2、3级设备用镍基合金焊丝和填充丝.

NB/T 20009.8-2012 is the Chinese energy industry standard covering welding Material for Pressurized Water Reactor Nuclear Power Plants, Part 8: Nickel-based Alloy Wires and Filler Rods for Classes 1, 2, 3 Components.

It was issued on 6 January 2012 and has been in force since 6 April 2012, as a first edition. The document is under the responsibility of the National Energy Administration.

This page is published from the official record of the 2012 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — NB/T 20009.8-2012

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General requirements
  • 4.1 Environmental conditions
  • 4.2 Basic principles
  • 4.3 Basic process
  • 5 Technical Requirements
  • 6 Test methods
  • 7 Inspection Rules
  • 8 Marking, packaging, transportation and storage
  • 9 Evaluation indicators

1 Foreword

NB/T 20009.8-2012 was issued by National Energy Administration of the People's Republic of China on 6 January 2012 and has been in force since 6 April 2012.

It is one of 39 parts of the NB/T 20009 series.

The NB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

NB/T 20009.8-2012 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 4,537 other NB/T standards.

Of the 1,959 NB/T standards that do carry an ICS number, 1,265 (65%) fall under ICS 27, in the field of energy and heat transfer engineering.

3 About this standard

Issued by: National Energy Administration of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

NB/T 20009.1-2010 — Part 1: Carbon Steel Covered Electrodes for Classes 1, 2, 3 Components

NB/T 20009.1-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 1: Carbon steel electrodes

NB/T 20009.2-2010 — Part 2: Low Alloy Steel Covered Electrodes for Classes 1, 2, 3, Components

NB/T 20009.2-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 2: Low alloy steel electrodes

NB/T 20009.3-2010 — Part 3: Stainless Steel Covered Electrodes for Classes 1,2,3 Components

NB/T 20009.3-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 3: Stainless steel welding rods

NB/T 20009.4-2013 — Welding Materials for Pressurized Water Reactor Nuclear Power Plants - Part 4: Nickel-based Alloy Covered Electrodes for Classes 1, 2, 3 Components

NB/T 20009.4-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 4: Nickel-based alloy electrodes

NB/T 20009.5-2013 — Welding Materials for Pressurized Water Reactor Nuclear Power Plants - Part 5: Carbon Steel Flux Cored Electrodes for Gas Shielded Arc Welding of Classes 1, 2, 3 Components

NB/T 20009.5-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 5: Carbon steel flux cored wires for gas shielded welding

NB/T 20009.6-2012 — Part 6: Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding of Classes 1, 2, 3 Components

NB/T 20009.6-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 6: Carbon steel solid wires for gas shielded welding

NB/T 20009.7-2012 — Part 7: Stainless Steel Wires and Filler Rods for Classes 1, 2, 3 Components

NB/T 20009.7-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 7: Stainless steel welding wires and filler wires

NB/T 20009.9-2013 — Welding Materials for Pressurized Water Reactor Nuclear Power Plants - Part 9: Carbon Steel Wires and Fluxes for Submerged Arc Welding of Classes 1, 2, 3 Components

NB/T 20009.9-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 9: Carbon steel wires and fluxes for submerged arc welding

NB/T 20009.10-2013 — Welding materials for pressurized water reactor nuclear power plants - Part 10: Low alloy steel welding wire and flux for submerged arc welding of class 1 components

NB/T 20009.10-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 10: Welding wires and fluxes for submerged arc welding of low alloy steels

NB/T 20009.11-2013 — Welding materials for pressurized water reactor nuclear power plants - Part 11: Stainless steel wires and fluxes for submerged arc welding of classes 1, 2, 3 components

NB/T 20009.11-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 11: Stainless steel wires and fluxes for submerged arc welding

NB/T 20009.12-2013 — Welding materials for pressurized water reactor nuclear power plants - Part 12: Nickel-based alloy strip cladding with flux for class 1 components

NB/T 20009.12-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 12: Welding strips and fluxes for nickel-based alloy surfacing

NB/T 20009.13-2013 — Welding material for pressurized water reactor nuclear power plants - Part 13: Stainless steel strips and fluxes for cladding of classes 1, 2, 3 components

NB/T 20009.13-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 13: Welding strips and fluxes for stainless steel surfacing

NB/T 20009.14-2013 — Welding material for pressurized water reactor nuclear power plants - Part 14: Hard facing welding consumables for classes 1, 2, 3 components

NB/T 20009.22-2015 — Welding material for pressurized water reactor nuclear power plants - Part 22: Low alloy covered electrodes for safety-related components

NB/T 20009.23-2017 — Welding material for pressurized water reactor nuclear power plants - Part 23: Stainless steel covered electrodes for safety-related components

NB/T 20009.24-2015 — Welding material for pressurized water reactor nuclear power plants - Part 24: Nickel alloy covered electrodes for safety-related components

NB/T 20009.27-2017 — Welding material for pressurized water reactor nuclear power plants - Part 27: Stainless steel wires and filler rods for safety related components

NB/T 20009.28-2015 — Welding material for pressurized water reactor nuclear power plants - Part 28: Nickel alloy welding electrodes for safety-related components

NB/T 20009.30-2017 — Welding material for pressurized water reactor nuclear power plants - Part 30: Low alloy steel welding wires and fluxes for submerged arc welding of safety class 1 components

NB/T 20009.31-2017 — Welding material for pressurized water reactor nuclear power plants - Part 31: Stainless steel strips and fluxes for cladding of Safety Related components

NB/T 20009.32-2018 — Welding material for pressurized water reactor nuclear power plants - Part 32: Low-alloy steel wires and rods for gas shielded arc welding

NB/T 20009.33-2015 — Welding material for pressurized water reactor nuclear power plants - Part 33: Stainless steel wire and fluxes for submerged arc welding of safety-related components

NB/T 20009.34-2017 — Welding material for pressurized water reactor nuclear power plants - Part 34: Nickel alloy strip and fluxes for cladding of safety-related components

NB/T 20009.35-2014 — Welding materials for pressurized water reactor nuclear power plants - Part 35: Low alloy steel covered electrodes for steel containment vessel

NB/T 20009.36-2018 — Welding material for pressurized water reactor nuclear power plants - Part 36: Wires for gas shielded arc welding for steel containment vessel

NB/T 20009.37-2019 — Welding materials for pressurized water reactor nuclear power plants Part 37: Submerged arc welding wires and fluxes for steel containment

Other editions:

NB/T 20009.8-2021 (later edition)

Standards on related subjects:

NB/T 47014-2023 — Welding procedure qualification for pressure equipments

GB/T 19866-2005 — Specification and qualification of welding procedures for metallic materials -- General rules

GB/T 19868.3-2005 — Welding procedure qualification by adoption of standard welding procedure

5 Classification and status

Prefix NB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download NB/T 20009.8-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 20009.8-2012

$135.00