Valid

NB/T 20009.7-2012Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 7: Stainless Steel Wires and Filler Rods for Classes 1, 2, 3 Components (English PDF)

压水堆核电厂用焊接材料 第7部分:1、2、3级设备用不锈钢焊丝和填充丝

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 20009.7-2012 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

January 6, 2012

Implementation date

April 6, 2012

Scope

NB/T 20009.7-2012 is the English-translated version of 压水堆核电厂用焊接材料 第7部分:1、2、3级设备用不锈钢焊丝和填充丝.

NB/T 20009.7-2012 is the Chinese standard "Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 7: Stainless Steel Wires and Filler Rods for Classes 1, 2, 3 Components".

Its scope clause reads: This part specifies the models, technical requirements, test methods, inspection rules, etc. of stainless steel wires and filler rods (hereafter referred to as “welding wires”) for Class 1, 2, 3 components of pressurized water reactor nuclear power plant.

This part is applicable to ER308L, ER309L and DER316L stainless steel wires for tungsten electrode gas shielded arc welding of Class 1, 2, 3 components of pressurized water reactor nuclear power plant.

Found what you need?

Document preview — NB/T 20009.7-2012

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Type
  • 4 Technical Requirements
  • 4.1 Chemical composition
  • 4.2 Size
  • 4.3 Surface quality
  • 4.4 Winding requirements
  • 4.5 Mechanical property of deposited metal (as welded)
  • 4.6 Delta ferrite content determination of deposited metal (as welded)
  • 4.7 Intergranular corrosion test of deposited metal (heat treatment condition)
  • 4.8 Radiographic test for weld
  • 5 Test Methods
  • 5.1 Chemical composition analysis
  • 5.2 Size and surface quality
  • 5.3 Preparation of deposited metal specimen
  • 5.4 Mechanical property test of deposited metal
  • 5.5 Delta ferrite content of deposited metal
  • 5.6 Intergranular corrosion test of deposited metal
  • 5.7 Radiographic test for weld
  • 6 Inspection Rules
  • 6.1 Batch division
  • 6.2 Sampling method
  • 6.3 Acceptance
  • 6.4 Re-inspection
  • 7 Packaging, Marking and Quality Certificate
  • 7.1 Packaging
  • 7.2 Marking
  • 7.3 Quality Certificate
  • Appendix A (Normative) Delong Diagram

1 Scope

This part specifies the models, technical requirements, test methods, inspection rules, etc. of stainless steel wires and filler rods (hereafter referred to as “welding wires”) for Class 1, 2, 3 components of pressurized water reactor nuclear power plant.

This part is applicable to ER308L, ER309L and DER316L stainless steel wires for tungsten electrode gas shielded arc welding of Class 1, 2, 3 components of pressurized water reactor nuclear power plant.

2 Normative References

The following documents are indispensable for the application of this document. For dated references, only the dated editions apply. For undated references, the latest editions (including any amendments) apply.

GB/T 223.03 Methods for Chemical Analysis of Iron, Steel and Alloy — The Diantipyryl Methane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content

GB/T 223.04 Alloyed Steel — Determination of Manganese Content — Potentiometric or Visual Titration Method

GB/T 223.05 Steel and Iron — Determination of Acid-soluble Silicon and Total Silicon Content — Reduced Molybdosilicate Spectrophotometric Method (GB/T 223.05-2008, ISO 4829-1:1986, ISO 4829-2:1988, MOD)

GB/T 223.11 Iron Steel and Alloy — Determination of Chromium Content — Visual Titration or Potentiometric Titration Method (GB/T 223.11-2008, ISO 4937:1986, MOD)

GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy — The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content

GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy — The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content

GB/T 223.21 Methods for Chemical Analysis of Iron Steel and Alloy — The 5-CL-PADAB Spectrophotometric Method for the Determination of Cobalt Content

GB/T 223.22 Methods for Chemical Analysis of Iron, Steel and Alloy — The Nitroso-R-salt Spectrophotometric Method for the Determination of Cobalt Content

GB/T 223.25 Methods for Chemical Analysis of Iron, Steel and Alloy — The Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content

GB/T 223.26 Methods for Chemical Analysis of Iron, Steel and Alloy — The Thiocyanate Direct Photometric Method for the Determination of Molybdenum Content

GB/T 223.36 Methods for Chemical Analysis of Iron, Steel and Alloy — The Neutral Titration Method for the Determination of Nitrogen Content after Distillation Separation

GB/T 223.37 Methods for Chemical Analysis of Iron, Steel and Alloy — The Indophenal Blue Photometric Methods for the Determination of Nitrogen Content after Distillation Separation

GB/T 223.38 Methods for Chemical Analysis of Iron, Steel and Alloy — The Anion-exchange Separation-gravimetric Method for the Determination of Niobium Content

GB/T 223.40 Iron Steel and Alloy — Detetmination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method

GB/T 223.59 Methods for Chemical Analysis of Iron, Steel and Alloy — The Reduced Molybdoantimonyl Phosphoric Acid Photometric Method for the Determination of Phosphorus Content

GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy — The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content

GB/T 223.61 Methods for Chemical Analysis of Iron, Steel and Alloy — The Ammonium Phosphomolybdate Volumetric Method for the Determination of Phosphorus Content […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 20009.7-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 20009.7-2012

$85.00