Valid

NB/T 20009.9-2013Welding Materials for Pressurized Water Reactor Nuclear Power Plants - Part 9: Carbon Steel Wires and Fluxes for Submerged Arc Welding of Classes 1, 2, 3 Components (English PDF)

压水堆核电厂用焊接材料 第9部分:1、2、3级设备埋弧焊用碳钢焊丝和焊剂

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 20009.9-2013 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

June 8, 2013

Implementation date

October 1, 2013

Scope

NB/T 20009.9-2013 is the English-translated version of 压水堆核电厂用焊接材料 第9部分:1、2、3级设备埋弧焊用碳钢焊丝和焊剂.

NB/T 20009.9-2013 is the Chinese standard "Welding Materials for Pressurized Water Reactor Nuclear Power Plants - Part 9: Carbon Steel Wires and Fluxes for Submerged Arc Welding of Classes 1, 2, 3 Components".

Its scope clause reads: This standard specifies the models, technical requirements, test methods, inspection rules and etc. of carbon steel wires and fluxes for submerged arc welding of Class 1, 2, 3 components.

This part is applicable to carbon steel wires and fluxes for submerged arc welding of Class 1, 2, 3 components of pressurized water reactor nuclear power plant. Its clauses include models; technical requirements.

Found what you need?

Document preview — NB/T 20009.9-2013

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative References
  • 3 Models
  • 4 Technical Requirements
  • 5 Test Methods
  • 6 Inspection Rules
  • 7 Packaging, Marking and Quality Certificate

1 Scope

This standard specifies the models, technical requirements, test methods, inspection rules and etc. of carbon steel wires and fluxes for submerged arc welding of Class 1, 2, 3 components.

This part is applicable to carbon steel wires and fluxes for submerged arc welding of Class 1, 2, 3 components of pressurized water reactor nuclear power plant.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.

GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy-The Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content

GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method (GB/T 223.5-2008, ISO 4829-1:1986, ISO 4829-2:1988, MOD)

GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Isodiametric Method for the Determination of Copper Content

GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content

GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content (GB/T 223.53-1987, eqv ISO/DIS 4943:1986)

GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Arsenite-sodium Nitrite Titrimetric Method for the Determination of Manganese Content

GB/T 223.59 Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method

GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content

GB/T 223.61 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Phosphomolybdate Volumetric Method for the Determination of Phosphorus Content

GB/T 223.62 Methods for Chemical Analysis of Iron, Steel and Alloy - The Butyl Acetate Extraction Photometric Method for the Determination of Phosphorus Content

GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content

GB/T 223.64 Iron Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (GB/T 223.64-2008, ISO 10700:1994, IDT)

GB/T 223.67 Iron Steel and Alloy - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method (GB/T 223.67-2008, ISO 10701:1994, IDT)

GB/T 223.68 Methods for Chemical Analysis of Iron,Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content

GB/T 223.69 Iron Steel and Alloy - Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace

GB/T 223.71 "Methods for Chemical Analysis of Iron, Steel and Alloy - The Gravimetric Method after Combustion in the Pipe Furnace for the Determination of Carbon Content"

GB/T 223.72 Iron steel and alloy - Determination of sulfur content - Gravimetric method

GB/T 223.79 Iron and Steel - Determination of Multi-element Contents - X-ray Fluorescence Spectrometry (Routine Method)

GB/T 223.85 Steel and Iron - Determination of Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace (GB/T 223.85-2009, ISO 4935:1989, IDT)

GB/T 223.86 Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method after Combustion in an Induction Furnace (GB/T 223.86-2009, ISO 9556:1989, IDT)

GB/T 2650 Impact Test Methods on Welded Joints (GB/T 2650-2008, ISO 9016:2001, IDT)

GB/T 2652 Tensile Test Methods on Weld and Deposited Metal (GB/T 2652-2008, ISO 5178:2001, IDT)

GB/T 3965 Methods for Determination of Diffusible Hydrogen in Deposited Metal

GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low-Alloy steel (Routine Method)

GB/T 4338 Metallic Materials- Tensile Testing at Elevated Temperature (GB/T 4338-2006, ISO 783:1999, MOD)

GB/T 5293 Carbon Steel Electrodes and Fluxes for Submerged Arc Welding

GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method) (GB/T20123-2006, ISO 15350:2000, IDT)

GB/T 25774.1 Test Methods for Welding Consumables - Part 1: Preparation and Testing of Deposited Metal Specimens for Mechanical Properties in Steel, Nickel and Nickel Alloys (GB/T25774.1-2010, ISO 15792-1:2000, MOD)

GB/T 25775 Technical Delivery Conditions for Welding Consumables - Type of Product Dimensions Tolerances and Markings (GB/T 25775-2010, ISO 544:2003, MOD)

GB/T 25778 Procurement Guidelines for Welding Consumables (GB/T 25778-2010, ISO 14344:2010, MOD)

NB/T 20002.4 Welding Code for Mechanical Components of PWR Nuclear Islands - Part 4: Assessment of Welding Filler Material

NB/T 20003.3 Non-destructive Testing for Mechanical Components in Nuclear Island of Nuclear Power Plants - Part 3: Radiographic Testing

3 Models

Models are classified according to the mechanical performance and heat treatment state of flux-wire combined deposited metal in this part.

The flux-wire combination is expressed with its code. The complete model is "Fxxx-Exxx"; thereinto, the initial "F" expresses flux; the first digit following "F" expresses the minimum tensile strength of deposited metal; the subsequent letters express the state of test piece; "A" expresses as welded; "P" expresses post-weld heat treatment state; the third digit expresses the lowest test temperature of deposited metal where the impact energy is not less than 27J; those following "-" express the category or designation of the adopted welding wire.

In this part, welding wire models include EM12K and EH12K, equivalent to EM12K and EH12K in AWS 5.17.

The welding material manufacturer shall assess the welding material in this part according to the requirements of NB/T 20002.4.

4 Technical Requirements

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download NB/T 20009.9-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 20009.9-2013

$105.00