NB/T 11646-2024Method of monitoring and early warning for spontaneous combustion in gobs of underground coal mine working face (English PDF)
井工煤矿采空区自然发火监测预警技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 11646-2024 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
September 24, 2024
Implementation date
March 24, 2025
Scope
NB/T 11646-2024 is the English-translated version of 井工煤矿采空区自然发火监测预警技术规范.
NB/T 11646-2024 sets out how underground coal mines monitor the gob behind a coal mining face for spontaneous combustion and raise early warnings. It contains general provisions, monitoring techniques, early warning techniques and methods, and the techniques and conditions for determining the three spontaneous combustion zones of the gob.
Key notions include the fire coefficient, the oxidizing zone and the alarm critical value beyond which coal oxidation enters a new stage.
Among its provisions is daily monitoring of gas in the gob and the extraction pipeline when seams prone to spontaneous combustion are mined, and gas chromatography and bundle tube monitoring are among the referenced methods. Issued on 24 September 2024, it has applied since 24 March 2025.
Found what you need?
Document preview — NB/T 11646-2024
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- D 09
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General Provisions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.
1 Scope
This document specifies the general provisions, monitoring technology, early warning technology and methods for monitoring and early warning of spontaneous combustion in goaf areas of coal mining working faces in underground coal mines.
Techniques and conditions for determining the "three zones" of spontaneous combustion in goaf areas, etc.
This document is applicable to the monitoring and early warning of spontaneous combustion in goaf areas of coal mining faces in underground coal mines.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document. document.
GB/T 15663.8 Coal Mine Scientific and Technological Terminology Part 8: Coal Mine Safety
KA/T 1019 Gas chromatography analysis of spontaneous combustion in coal seams and index selection method
MT/T 757 General technical requirements for spontaneous combustion bundle pipe monitoring system in coal mines
3 Terms and definitions
The terms and definitions defined in GB/T 15663.8 and the following apply to this document.
3.1 Fire coefficient
It is an index parameter that can reflect that coal has entered a certain stage in the process of low-temperature oxidation heat storage.
3.2 Oxidizing zone
The area where the coal left in the goaf combines with oxygen in the air to undergo physical and chemical changes and store heat.
3.3 Alarming critical value
A specific value in the oxidation heat storage process of coal. When this value is reached or exceeded, the oxidation heat storage process of coal will enter a new stage.
4 General Provisions
4.1 Coal mines should establish a system for predicting and forecasting spontaneous combustion in goaf areas, and dynamically grasp the potential spontaneous combustion hazards or spontaneous combustion situations in goaf areas.
4.2 When mining coal seams that are prone to spontaneous combustion or self-ignition, the gas concentration in the goaf of the coal mining face and the gas extraction pipeline should be monitored daily;
For coal-burning seams, spontaneous combustion monitoring of goaf areas should be carried out at least once a week.
4.3 Coal mines should establish a spontaneous combustion monitoring and early warning system, collect statistics on the changes in spontaneous combustion indicators, draw trend charts, and conduct spontaneous combustion monitoring and early warning.
Fire prediction. once a certain indicator is found to reach a critical value, a forecast should be made quickly.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download NB/T 11646-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15663.8-2008 — Terms relating to coal mining - Part 8: Mine safety
NB/T 10086-2025 — Regulations for Compiling Energy Conservation Reports for Wind Farm Projects
NB/T 10103-2025 — Technical Specifications for Micro-Site Selection in Wind Farm Projects
Secure payment via Stripe
Payments accepted
NB/T 11646-2024
$85.00