NB/T 10736-2021Testing method of energy consumption for slime drying system (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the general test rules, test boundary, test method, test result calculation and test for energy consumption test of slime drying process system Report.

This document applies to slime drying process systems.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 211 Determination method of total moisture in coal

GB/T 212 Industrial Analysis Method of Coal

GB/T 213 Determination method of calorific value of coal

GB/T 475 Manual method for commercial coal samples

GB/T 476 Determination method of carbon and hydrogen in coal

GB/T 12206 Determination method of calorific value and relative density of urban gas

GB/T 12497 Three-phase asynchronous motor economical operation

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

4 General test rules

4.1 Before the test, a test outline should be formulated according to the specific situation. The test syllabus should include at least the following.

a) test purpose and requirements;

b) Test boundaries, test items, test methods and requirements;

c) Measuring point layout and required instruments;

d) personnel organization and division of labor;

e) test data recording and processing;

f) test progress and schedule; g) other.

4.2 The pre-test requirements should include the following.

a) The instruments used in the test should be qualified instruments within the validity period of verification or calibration;

b) The installation of test instruments and meters shall meet the test requirements and the installation requirements of corresponding instruments and meters.