Valid

NB/T 10734-2021Code of practice for controlled source audio-frequency magnetotelluric method in coal (English PDF)

煤炭可控源音频大地电磁测深法技术规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for NB/T 10734-2021 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

November 16, 2021

Implementation date

February 16, 2022

Scope

NB/T 10734-2021 is the English-translated version of 煤炭可控源音频大地电磁测深法技术规程.

NB/T 10734-2021 is the coal-sector code of practice for the controlled source audio-frequency magnetotelluric method (CSAMT), a frequency-domain electromagnetic sounding technique that injects audio-frequency current through grounded electrodes and derives Cagniard apparent resistivity and impedance phase.

It covers technical design, use and maintenance of instruments, fieldwork, data processing and interpretation, and report preparation and submission. Appendices give field observation records, leakage and grounding resistance checks, quality grading of resistivity and phase curves, checkpoint error statistics and report content.

It applies to coal resource exploration, coalfield hydrogeology and detection of hidden geological hazards in coal mines. Its introduction notes that coal work previously relied on DZ/T 0280-2015. Issued on 16 November 2021, it has applied since 16 February 2022.

Found what you need?

Document preview — NB/T 10734-2021

National Standard of the People's Republic of China

Classification
D 11

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Symbols and units of measure
  • 5 General
  • 6 Technical Design
  • 7 Use and maintenance of instruments and equipment
  • 8 Fieldwork
  • 9 Data processing and interpretation
  • 10 Report preparation and submission
  • Appendix A (Informative) Design Compilation and Approval Requirements
  • Appendix B (Informative) Field Observation Records
  • Appendix C (Informative) Field Leakage, Grounding Resistance, Range Detection Methods
  • Appendix D (Informative) Full Video Resistivity and Phase Curve Quality Rating Table
  • Appendix E (Informative) Checkpoint Error Statistics Table
  • Appendix F (Informative) Statistical Table of Quality Rating of the Region
  • Appendix G (Informative) Report Compilation Content and Figure Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

Introduction

For a long time, the exploration of coal controlled source audio frequency magnetotelluric method has mainly been based on the "Technical Regulations of Controlled Source Audio Frequency Magnetotelluric Method" (DZ/T 0280-2015) for resource and geological structure exploration. In recent years, with the development of coal mining intensity, mining depth and mining methods With the continuous changes in the field, the geological problems to be solved have changed. At the same time, the controllable source audio magnetotelluric sounding exploration equipment has been continuously updated, The technical level has been continuously improved and the application has become more extensive. In order to meet the needs of the current coal geological exploration work, the controllable source audio frequency magnetotelluric method is standardized.

In the field of coal geological exploration, the General Administration of Coal Geology of China, together with relevant production units, scientific research institutes and colleges and universities, etc.

The current situation of carbon controllable source audio magnetotelluric sounding exploration equipment and technology, based on the principles of advancement, consistency, standardization and practicability, has compiled the "Coal Carbon Controlled Source Audio Magnetotelluric Sounding Technical Regulations. Technical Specification for Coal Controlled Source Audio Magnetotelluric Sounding

1 Scope

This document specifies the technical design and instrumentation of the controllable source audio frequency magnetotelluric sounding method (CSAMT) in coal geological exploration.

Equipment use and maintenance, field work, data processing and interpretation, report preparation and submission and other technical requirements.

This document is applicable to the controllable source magnetotelluric sounding in the exploration of coal geological resources, coal field hydrogeology, and hidden hazard-causing geological factors in coal mines law work.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 14499 Geophysical prospecting technical symbols

CH/T 2009 Global Positioning System Real Time Kinematics (RTK) Technical Specification

DZ/T 0069 Geophysical Exploration Map Schema Legend and Color Standard

DZ/T 0153 Specification for Geophysical and Geochemical Exploration Engineering Measurements

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Controlled source audio-frequency magnetotelluric method

A kind of artificial source Karnia apparent resistivity measurement developed on the basis of magnetotelluric method (MT) and audio frequency magnetotelluric method (AMT). deep method. The transmitter is used to supply alternating current in the audio frequency range to the ground through ground electrodes A and B, and an alternating electromagnetic field is formed underground.

The electromagnetic field from a fairly distant source is close to the position of the plane wave, and the horizontal component of the electric field (Ex or Ey) and the horizontal component of the magnetic field (Hy or Hx) are measured, It is a frequency domain electromagnetic sounding method to detect the geological target body by calculating the apparent resistivity and impedance phase of Karnia at the corresponding frequency.

3.2 TM mode

The power supply electrode AB, the receiving electrode MN and the direction of the survey line are arranged perpendicular to the strike of the geological structure.

4 Symbols and units of measure

Common terms, symbols and measurement units are shown in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 10734-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
25 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 10734-2021

$420.00