JG/T 481-2015Water-based interior wall coating with low-emission volatile organic compounds (VOC) (English PDF)
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for JG/T 481-2015 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
November 23, 2015
Implementation date
April 1, 2016
Scope
JG/T 481-2015 (Water-based interior wall coating with low-emission volatile organic compounds (VOC)) is available as an English-translated PDF.
JG/T 481-2015 — This Standard specifies the terms and definitions, classification and marks, requirements, test methods, inspection rules, signs, packaging, transport and storage of water-based interior wall coating with low-emission volatile organic compounds (VOC).
This Standard is applicable to water-based coating materials such as paste putty, primer, topcoat, and wood paint used for interior decoration.
Found what you need?
Document preview — JG/T 481-2015
National Standard of the People's Republic of China
- Classification
- Q 04
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword...3
- 1 Scope...4
- 2 Normative references...4
- 3 Terms and definitions...5
- 4 Classification and marks...5
- 5 General requirements...6
- 6 Limits of hazardous substances and requirements for physical properties...6
- 7 Test methods...8
- 8 Inspection rules...10
- 9 Signs, packaging, transport and storage...11
- Annex A (informative) Substances that shall not be contained in the product12
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by Institute of Standard Quotas, Ministry of
Housing and Urban-Rural Development.
This Standard shall be under the jurisdiction of Technical Committee for
Standardization of Building Products and Components of the Ministry of
Housing and Urban-Rural Development.
Main drafting organizations of this Standard. Shanghai Building Research
Institute (Group) Co., Ltd.
The drafting organizations of this Standard. Shanghai Jianke Inspection Co.,
Ltd., Dow Chemical (China) Investment Co., Ltd., Xiamen Engineering Testing
Center Co., Ltd., Nippon Paint (China) Co., Ltd., Sichuan Academy of Building
Materials Industry Science, Shanxi Jiayufeng Chemical Technology Co., Ltd.,
Celanese (China) Investment Co., Ltd., Eastman (Shanghai) Chemical
Business Co., Ltd., Shanghai Yanyi Wall Material Technology Co., Ltd.,
AkzoNobel Swire Paints (Shanghai) Co., Ltd., Sichuan Jiabaoli Coating Co.,
Ltd., National Chemical Building Materials Testing Center, Wacker Chemical
(China) Co., Ltd., Shanghai Bao Li Jia Chemical Co., Ltd., BASF (China) Co.,
Ltd., Shunde District of Foshan City, Bud Fu Industrial Co., Ltd., Shanghai
Qiaomao Building Waterproof Material Co., Ltd., Tsinghua University, Xuanwei
(Shanghai) Coating Co., Ltd., Crocodile Paint (Shanghai) Co., Ltd., Shanghai
Jiabaoli Coating Co., Ltd.
Main drafters of this Standard. Hu Xiaozhen, Ren Binbin, Qiu Cong, Zhao Min,
Huang Xinhui, Jing Weijie, Xu Yanhua, Tang Lei, Lyu Ping, Qiu Xinghua, Shi
Yifang, Li Jingguang, Zhang Yinping, Zeng Changying, Wang Zhenhua, Yang
Weijiang, Wang Yan, Zhu Liguang.
Water-based interior wall coating with low-emission
volatile organic compounds (VOC)
1 Scope
This Standard specifies the terms and definitions, classification and marks,
requirements, test methods, inspection rules, signs, packaging, transport and
storage of water-based interior wall coating with low-emission volatile organic
compounds (VOC).
This Standard is applicable to water-based coating materials such as paste
putty, primer, topcoat, and wood paint used for interior decoration.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 3186, Paints varnishes and raw materials for paints and varnishes -
Sampling
GB/T 6682, Water for analytical laboratory use - Specification and test
methods
GB/T 8170-2008, Rules of rounding off for numerical values & expression
and judgement of limiting values
GB/T 9750, Marks for package of coating products
GB/T 9756-2009, Synthetic resin emulsion coatings for interior wall
GB/T 9780-2013, Test Method for Dirt Pickup Resistance and Stain Removal
of Film of Architectural Coatings and Paint
GB 11614, Flat glass
GB/T 13491-1992, General rule for packing of coatings
GB/T 15608, The Chinese color system
GB/T 18204.2-2014, Examination methods for public places - Part 2.
Chemical pollutants
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 water-based interior wall coating with low-emission volatile organic
compounds (VOC)
The interior wall coating material that has low volatile organic compound (VOC)
content and low total volatile organic compound (TVOC) emission level under
conditions that meet basic physical properties.
4 Classification and marks
4.1 Classification
The water-based interior wall coating with low-emission volatile organic
compounds (VOC) is classified according to the following rules.
5 General requirements
The product shall not contain harmful substances. See Annex A.
6 Limits of hazardous substances and requirements for
physical properties
6.1 Limits of hazardous substances
The limits of hazardous substances in the product shall meet the requirements
of Table 1.
6.3.3 The physical properties of interior wall paint shall meet the requirements
of Table 5.
6.3.4 The physical properties of wood paint shall meet the requirements of
Class C decoration paints in GB/T 23999-2009.
7 Test methods
7.1 General provisions
7.1.1 The products shall be sampled according to GB/T 3186.The sampling
size shall be determined according to inspection needs.
7.1.2 Laboratory standard test conditions. temperature of 23°C±2°C, relative
humidity of 50%±5%.
7.2 Hazardous substance limits
The hazardous substance limits in paste putty, interior wall primer and interior
wall paint shall be in accordance with GB 18582.The hazardous substance
limits in wood paint shall be in accordance with GB 24410.Hexavalent
chromium is carried out in accordance with Annex F in GB 24408-2009.
7.3 Hazardous substance emission level
7.3.1 Total volatile organic compounds (TVOC) emission level
Total volatile organic compounds (TVOC) emission level is in accordance with
Annex B.
7.4 Physical properties
7.4.1 The properties of paste putty are in accordance with Clause 6 of JG/T
298-2010.
7.4.2 The properties of interior wall primer are in accordance with Clause 6 of
JG/T 210-2007.
7.5 Inspection results
The inspection results are carried out according to the rounding-off comparison
method in GB/T 8170-2008.
8 Inspection rules
8.1 Inspection items
The product inspection is divided into exit-factory inspection and type inspection.
8.3 Type inspection
8.3.1 The type inspection items shall include all technical requirements in
Clause 6.
8.3.2 The type inspection should be conducted in one of the following cases.
8.4 Determination rules
When the inspection results of the inspected items meet the requirements of
this Standard, this test sample meets the requirements of this Standard and is
determined as a conforming item.
8.5 Lot
Take each kettle as a lot. When it is less than one kettle, it shall be counted as
a lot.
9 Signs, packaging, transport and storage
9.1 Signs
In accordance with GB/T 9750.If it requires to add water to dilute, it shall specify
the dilution ratio.
JG/T 481-2015
CONSTRUCTION INDUSTRY STANDARD
ICS 91.00
Q 04
Water-based interior wall coating with low-emission
volatile organic compounds (VOC)
Issued on. NOVEMBER 23, 2015
Implemented on. APRIL 01, 2016
Issued by. Ministry of Housing and Urban-Rural Development of the
People's Republic of China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Classification and marks... 5
5 General requirements... 6
6 Limits of hazardous substances and requirements for physical properties... 6
7 Test methods... 8
8 Inspection rules... 10
9 Signs, packaging, transport and storage... 11
Annex A (informative) Substances that shall not be contained in the product 12
Annex B (normative) Test of total volatile organic compounds (TVOC) emission
level... 13
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by Institute of Standard Quotas, Ministry of
Housing and Urban-Rural Development.
This Standard shall be under the jurisdiction of Technical Committee for
Standardization of Building Products and Components of the Ministry of
Housing and Urban-Rural Development.
Main drafting organizations of this Standard. Shanghai Building Research
Institute (Group) Co., Ltd.
The drafting organizations of this Standard. Shanghai Jianke Inspection Co.,
Ltd., Dow Chemical (China) Investment Co., Ltd., Xiamen Engineering Testing
Center Co., Ltd., Nippon Paint (China) Co., Ltd., Sichuan Academy of Building
Materials Industry Science, Shanxi Jiayufeng Chemical Technology Co., Ltd.,
Celanese (China) Investment Co., Ltd., Eastman (Shanghai) Chemical
Business Co., Ltd., Shanghai Yanyi Wall Material Technology Co., Ltd.,
AkzoNobel Swire Paints (Shanghai) Co., Ltd., Sichuan Jiabaoli Coating Co.,
Ltd., National Chemical Building Materials Testing Center, Wacker Chemical
(China) Co., Ltd., Shanghai Bao Li Jia Chemical Co., Ltd., BASF (China) Co.,
Ltd., Shunde District of Foshan City, Bud Fu Industrial Co., Ltd., Shanghai
Qiaomao Building Waterproof Material Co., Ltd., Tsinghua University, Xuanwei
(Shanghai) Coating Co., Ltd., Crocodile Paint (Shanghai) Co., Ltd., Shanghai
Jiabaoli Coating Co., Ltd.
Main drafters of this Standard. Hu Xiaozhen, Ren Binbin, Qiu Cong, Zhao Min,
Huang Xinhui, Jing Weijie, Xu Yanhua, Tang Lei, Lyu Ping, Qiu Xinghua, Shi
Yifang, Li Jingguang, Zhang Yinping, Zeng Changying, Wang Zhenhua, Yang
Weijiang, Wang Yan, Zhu Liguang.
Water-based interior wall coating with low-emission
volatile organic compounds (VOC)
1 Scope
This Standard specifies the terms and definitions, classification and marks,
requirements, test methods, inspection rules, signs, packaging, transport and
storage of water-based interior wall coating with low-emission volatile organic
compounds (VOC).
This Standard is applicable to water-based coating materials such as paste
putty, primer, topcoat, and wood paint used for interior decoration.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 3186, Paints varnishes and raw materials for paints and varnishes -
Sampling
GB/T 6682, Water for analytical laboratory use - Specification and test
methods
GB/T 8170-2008, Rules of rounding off for numerical values & expression
and judgement of limiting values
GB/T 9750, Marks for package of coating products
GB/T 9756-2009, Synthetic resin emulsion coatings for interior wall
GB/T 9780-2013, Test Method for Dirt Pickup Resistance and Stain Removal
of Film of Architectural Coatings and Paint
GB 11614, Flat glass
GB/T 13491-1992, General rule for packing of coatings
GB/T 15608, The Chinese color system
GB/T 18204.2-2014, Examination methods for public places - Part 2.
Chemical pollutants
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 water-based interior wall coating with low-emission volatile organic
compounds (VOC)
The interior wall coating material that has low volatile organic compound (VOC)
content and low total volatile organic compound (TVOC) emission level under
conditions that meet basic physical properties.
4 Classification and marks
4.1 Classification
The water-based interior wall coating with low-emission volatile organic
compounds (VOC) is classified according to the following rules.
5 General requirements
The product shall not contain harmful substances. See Annex A.
6 Limits of hazardous substances and requirements for
physical properties
6.1 Limits of hazardous substances
The limits of hazardous substances in the product shall meet the requirements
of Table 1.
6.3.3 The physical properties of interior wall paint shall meet the requirements
of Table 5.
6.3.4 The physical properties of wood paint shall meet the requirements of
Class C decoration paints in GB/T 23999-2009.
7 Test methods
7.1 General provisions
7.1.1 The products shall be sampled according to GB/T 3186.The sampling
size shall be determined according to inspection needs.
7.1.2 Laboratory standard test conditions. temperature of 23°C±2°C, relative
humidity of 50%±5%.
7.2 Hazardous substance limits
The hazardous substance limits in paste putty, interior wall primer and interior
wall paint shall be in accordance with GB 18582.The hazardous substance
limits in wood paint shall be in accordance with GB 24410.Hexavalent
chromium is carried out in accordance with Annex F in GB 24408-2009.
7.3 Hazardous substance emission level
7.3.1 Total volatile organic compounds (TVOC) emission level
Total volatile organic compounds (TVOC) emission level is in accordance with
Annex B.
7.4 Physical properties
7.4.1 The properties of paste putty are in accordance with Clause 6 of JG/T
298-2010.
7.4.2 The properties of interior wall primer are in accordance with Clause 6 of
JG/T 210-2007.
7.5 Inspection results
The inspection results are carried out according to the rounding-off comparison
method in GB/T 8170-2008.
8 Inspection rules
8.1 Inspection items
The product inspection is divided into exit-factory inspection and type inspection.
8.3 Type inspection
8.3.1 The type inspection items shall include all technical requirements in
Clause 6.
8.3.2 The type inspection should be conducted in one of the following cases.
8.4 Determination rules
When the inspection results of the inspected items meet the requirements of
this Standard, this test sample meets the requirements of this Standard and is
determined as a conforming item.
8.5 Lot
Take each kettle as a lot. When it is less than one kettle, it shall be counted as
a lot.
9 Signs, packaging, transport and storage
9.1 Signs
In accordance with GB/T 9750.If it requires to add water to dilute, it shall specify
the dilution ratio.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 8170-2008Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 9750General rules for packaging, labelling, transport and storage of coating material and pigment products
- GB/T 9756-2009Synthetic resin emulsion coatings for interior wall
- GB/T 9780-2013Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint
How to Download JG/T 481-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11614-2022 — Flat glass
GB/T 13491-1992 — General rule for packing of coatings
GB/T 15608-2006 — The Chinese color system
Secure payment via Stripe
Payments accepted
JG/T 481-2015
$160.00