JB/T 9783-2013Seeders - Fluted roller metering devices (English PDF)
播种机 外槽轮排种器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9783-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 9783-2013 is the English-translated version of 播种机 外槽轮排种器.
JB/T 9783-2013 is a recommended machinery industry standard of China for the fluted roller metering devices fitted to seeders. It lays down the types and basic parameters of the device, its technical requirements, the test methods, the inspection rules and the packaging and storage provisions.
The devices covered are the external fluted roller seed meters of sowing machines. It replaces JB/T 9783-1999. It quotes GB/T 2828.1, GB/T 9478 and JB/T 5673. Its Chinese classification is B91 and its international classification 65.060.30.
Found what you need?
Document preview — JB/T 9783-2013
National Standard of the People's Republic of China
- ICS
- 65.060.30
- Replacing
- JB/T 9783-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 9783-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 9783-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended machinery industry standard of China for the fluted roller metering devices fitted to seeders. It lays down the types and basic parameters of the device, its technical requirements, the test methods, the inspection rules and the packaging and storage provisions. The devices covered are the external fluted roller seed meters of sowing machines. It replaces JB/T 9783-1999. It quotes GB/T 2828.1, GB/T 9478 and JB/T 5673. Its Chinese classification is B91 and its international classification 65.060.30.
JB/T 9783-2013 falls under ICS 65.060.30, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2828.1
GB/T 9478
JB/T 5673
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9783-1999 (earlier edition)
Standards on related subjects:
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 9782-2026 — Equipment for crop protection - General test methods
JB/T 9788-2020 — Subsoiler shovels and shanks
JB/T 9777-2018 — Hand-feed rice and straw thresher - Technical regulations
6 Classification and status
International classification (ICS): 65.060.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 9478Testing methods of sowing in lines
- JB/T 5673Tractors and machinery for agriculture and forestry - Painting - General technical requirements
Editions of JB/T 9783
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9783-2013 | Seeders - Fluted roller metering devices | current edition | Current |
| JB/T 9783-1999 | Seeders - Fluted roller metering devices | previous edition | Superseded |
This page sells the current edition, JB/T 9783-2013. Earlier editions are listed for reference only.
How to Download JB/T 9783-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 9478-1988 — Test methods of grain drills
JB/T 9783-2013
$135.00