Valid

JB/T 9781-2011Sprayer - Spray parts (English PDF)

喷雾机(器) 喷射部件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 9781-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

April 1, 2012

Scope

JB/T 9781-2011 is the English-translated version of 喷雾机(器) 喷射部件.

JB/T 9781-2011 is a recommended Chinese machinery industry standard on the spray parts of sprayers. It sets the technical requirements for those parts, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.

It applies to the spray parts of hydraulic sprayers used in agriculture, in forestry and in health and epidemic prevention work, while the parts of boom sprayers lie outside it.

The standard is classified B91 in the Chinese scheme, it was issued by the Ministry of Industry and Information Technology, and it cites GB 10395.6, GB/T 20084, GB/T 20085 and HG/T 3043.

It supersedes JB/T 9781-1999, and JB/T 9797-1999 is recorded alongside it as superseded.

Found what you need?

Document preview — JB/T 9781-2011

National Standard of the People's Republic of China

ICS
85.060.40
Replacing
JB/T 9797-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 9781-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.

It replaces the earlier edition JB/T 9781-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on the spray parts of sprayers. It sets the technical requirements for those parts, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. It applies to the spray parts of hydraulic sprayers used in agriculture, in forestry and in health and epidemic prevention work, while the parts of boom sprayers lie outside it. The standard is classified B91 in the Chinese scheme,6, GB/T 20084, GB/T 20085 and HG/T 3043. It supersedes JB/T 9781-1999, and JB/T 9797-1999 is recorded alongside it as superseded.

JB/T 9781-2011 falls under ICS 85.060.40, in the field of paper technology.

This catalogue holds 21,922 other JB/T standards.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 10395.6

GB/T 20084

GB/T 20085

HG/T 3043

4 Where this standard sits

It cites 4 standards, listed in full above.

3 other standards in this catalogue cite it, among them GB/T 33006-2016, JB/T 10807-2015, JB/T 6661-2015.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

JB/T 9781-1999 (earlier edition)

Standards on related subjects:

GB/T 12785-2014 — Test methods for submersible motor-pumps

GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines

JB/T 10600-2006 — Vertical self-priming pumps

JB/T 9782-2026 — Equipment for crop protection - General test methods

JB/T 9788-2020 — Subsoiler shovels and shanks

JB/T 9777-2018 — Hand-feed rice and straw thresher - Technical regulations

7 Classification and status

International classification (ICS): 85.060.40

Chinese Standard Classification (CCS): B 91

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Editions of JB/T 9781

EditionTitleRevisionStatus
JB/T 9781-2011Sprayer - Spray partscurrent editionCurrent
JB/T 9797-1999Sprayer - Spray partsprevious editionSuperseded

This page sells the current edition, JB/T 9781-2011. Earlier editions are listed for reference only.

How to Download JB/T 9781-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 9781-2011

$149.00