Valid

JB/T 9707-2013Choppers (English PDF)

铡草机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 9707-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 9707-2013 is the English-translated version of 铡草机.

JB/T 9707-2013 is a recommended standard of the Chinese machinery industry for choppers, the machines that cut fodder into short lengths. It fixes their technical requirements and their safety requirements, and it sets the test methods, inspection rules, marking, packaging, transport and storage.

The machines in its field are the drum-type and disc-type choppers used in forage processing. Among the standards it quotes are GB/T 699, GB/T 1184-1996, GB/T 1801-2009, GB 7681-2008, GB 10396 and JB/T 5171.

Its Chinese classification is B93 and its international classification 65.060.99, and it was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 9707-2013

National Standard of the People's Republic of China

ICS
65.060.99
Replacing
JB/T 9707.2-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 9707-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It is one of 3 parts of the JB/T 9707 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for choppers, the machines that cut fodder into short lengths. It fixes their technical requirements and their safety requirements, and it sets the test methods, inspection rules, marking, packaging, transport and storage. The machines in its field are the drum-type and disc-type choppers used in forage processing. Among the standards it quotes are GB/T 699, GB/T 1184-1996, GB/T 1801-2009, GB 7681-2008, GB 10396 and JB/T 5171. Its Chinese classification is B93 and its international classification 65.060.99, and

JB/T 9707-2013 falls under ICS 65.060.99, in the field of agriculture.

This catalogue holds 368 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 699

GB/T 985.1

GB/T 985.2

GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications

GB/T 1348

GB/T 1801-2009 — Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits

GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan

GB/T 3768

GB 7681-2008 — Safety technical requirements for choppers

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

GB/T 9439

GB 10396

GB 13306

JB/T 5171

JB/T 5673

JB/T 7288

JB/T 11439

4 Where this standard sits

It cites 17 standards, among them GB/T 1184-1996, GB/T 1801-2009, GB/T 2828.1-2003, listed in full above.

It is one part of the JB/T 9707 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 9707.1-1999 — Forage choppers - Technical requirements

JB/T 9707.2-1999 — Forage choppers - Test methods

Standards on related subjects:

GB/T 12785-2014 — Test methods for submersible motor-pumps

GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines

JB/T 10600-2006 — Vertical self-priming pumps

JB/T 7321-2025 — Tea air sorting machine

JB/T 6670-2025 — Tea cutting machine

JB/T 5674-2025 — Tea tree pruning machine

7 Classification and status

International classification (ICS): 65.060.99

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 13306

Editions of JB/T 9707

EditionTitleRevisionStatus
JB/T 9707-2013Chopperscurrent editionCurrent
JB/T 9707.2-1999Choppersprevious editionSuperseded

This page sells the current edition, JB/T 9707-2013. Earlier editions are listed for reference only.

How to Download JB/T 9707-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 9707-2013

$165.00