JB/T 5155-2013Technical Specification of Grass Grinder (English PDF)
饲草粉碎机 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5155-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 5155-2013 is the English-translated version of 饲草粉碎机 技术条件.
JB/T 5155-2013 gives the technical specification for the grass grinder and is a recommended standard of the Chinese machinery industry. Its provisions are the technical requirements for the forage grinder, the test methods, the inspection rules and the rules for marking, packaging, transportation and storage.
It is applied to forage feed hammer mills with tangential feed and with axial feed. The standard is placed under Chinese classification B93 and international classification 65.060.99, and was issued by the Ministry of Industry and Information Technology.
Its quoted standards are GB/T 699, GB/T 6971, GB/T 9239.1, GB/T 12620, GB/T 13306, JB/T 5673, JB 6938 and JB/T 9707. It supersedes JB/T 5155-1991.
Found what you need?
Document preview — JB/T 5155-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 5155-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5155-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 5155-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 5155-2013 gives the technical specification for the grass grinder and is a recommended standard of the Chinese machinery industry. Its provisions are the technical requirements for the forage grinder, the test methods, the inspection rules and the rules for marking, packaging, transportation and storage. It is applied to forage feed hammer mills with tangential feed and with axial feed. The standard is placed under Chinese classification B93 and international classification 65.060.99, and was issued by the Ministry of Industry and Information Technology. Its quoted standards are GB/T 699, GB/T 6971, GB/T 9239.1, GB/T 12620, GB/T 13306, JB/T 5673, JB 6938 and JB/T 9707. It supersedes JB/T 5155-1991.
JB/T 5155-2013 falls under ICS 65.060.99, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 699
GB/T 6971
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 12620-2008 — Round and elongated apertures with round and square plate screens
GB/T 13306
JB/T 5673
JB 6938
JB/T 9707
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5155-1991 (earlier edition)
Standards on related subjects:
LY/T 3022-2018 — Garden machinery - Hand-held chain-saws with lithium-ion battery as power source
GB/T 2818-2014 — Submersible motors for deep wells
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 6670-2025 — Tea cutting machine
JB/T 5674-2025 — Tea tree pruning machine
JB/T 5161-2013 — Pellet Mill
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699Quality carbon structure steels
- GB/T 6971Test method for feed mills
- GB/T 9239.1-2006Mechanical vibration—Rotor balancing—Part 1:Introduction
- GB/T 12620-2008Round and elongated apertures with round and square plate screens
- GB/T 13306Plates
- JB/T 5673Tractors and machinery for agriculture and forestry - Painting - General technical requirements
Editions of JB/T 5155
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5155-2013 | Technical Specification of Grass Grinder | current edition | Current |
| JB/T 5155-1991 | Technical Specification of Grass Grinder | previous edition | Superseded |
This page sells the current edition, JB/T 5155-2013. Earlier editions are listed for reference only.
How to Download JB/T 5155-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 5155-2013
$85.00