JB/T 9616-1999Series Y (IP44) three-phase asynchronous motors (frame size 80 to 315) - Technical specifications (English PDF)
Y系列(IP44)三相异步电动机 技术条件(机座号80~315)
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9616-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 6, 1999
Implementation date
January 1, 2000
Scope
JB/T 9616-1999 is the English-translated version of Y系列(IP44)三相异步电动机 技术条件(机座号80~315).
JB/T 9616-1999 is a recommended Chinese machinery industry standard, and it carries the specification for the series Y three-phase asynchronous motors of enclosure class IP 44, in frame sizes 80 to 315.
It carries the Chinese classification K22. Among the standards it quotes are GB 191-1990, GB/T 755-1987, GB/T 997-1981, GB/T 1032-1985, GB/T 1993-1993, GB/T 4772.1-1984, GB/T 4942.1-1985, GB/T 10068-1988, GB/T 10069-1988, GB/T 12665-1990, JB/T 9615.1-1999 and JB/T 9615.2-1999. It took the place of the earlier ZB K22007-1988.
Found what you need?
Document preview — JB/T 9616-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 9616-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 August 1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 18 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard, and it carries the specification for the series Y three-phase asynchronous motors of enclosure class IP 44, in frame sizes 80 to 315. It carries the Chinese classification K22. Among the standards it quotes are GB 191-1990, GB/T 755-1987, GB/T 997-1981, GB/T 1032-1985, GB/T 1993-1993, GB/T 4772.1-1984, GB/T 4942.1-1985, GB/T 10068-1988, GB/T 10069-1988, GB/T 12665-1990, JB/T 9615.1-1999 and JB/T 9615.2-1999. It took the place of the earlier ZB K22007-1988.
JB/T 9616-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB 191-1990 — Packaging--Pictorial markings for handling of goods
GB/T 755-1987 — General requirements for rotating electrical machines
GB/T 997-1981 — Symbols for types of construction and mounting arrangements of rotating electrical machinery
GB/T 1032-1985 — Test procedure for three-phase induction motors
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4772.1-1984 — Dimensions and tolerances for rotating electrical machines--Machines with frame numbers 36 to 400 and flange numbers FF55 to FF1080 or FT55 to FT1080
GB/T 4942.1-1985 — Classification of degrees of protection provided by enclosures for rotating machines
GB/T 10068-1988
GB/T 10069-1988
GB/T 12665-1990 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 9615.1-1999
JB/T 9615.2-1999
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 18 pages
5 Classification and status
Chinese Standard Classification (CCS): K 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 191-1990Packaging-Pictorial marking for handling of goods
- GB/T 755-1987Rotating electrical machines - Rating and performance
- GB/T 997-1981Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1032-1985Test methods for three-phase asynchronous motors
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4772.1-1984Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
GB/T 10069-1988
Similar standards
How to Download JB/T 9616-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 191-1990 — Packaging--Pictorial markings for handling of goods
GB/T 1032-1985 — Test procedure for three-phase induction motors
GB/T 12665-1990 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 9616-1999
$724.00