JB/T 9341.2-2013Metrology grating - Part 2: Digital readout (English PDF)
计量光栅 第2部分：数显表（卡）
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9341.2-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 9341.2-2013 is the English-translated version of 计量光栅 第2部分：数显表（卡）.
JB/T 9341.2-2013 is the recommended Chinese machinery industry standard for the digital readout unit used with metrology gratings. It classifies these readout meters and cards, then sets their basic parameters, their requirements, the test methods and the inspection rules, together with the provisions on marking, packaging, transport and storage.
The readout is the instrument that turns the grating signal into a displayed figure. The document sits under Chinese classification N34 and international classification 37.020.
Among the standards it quotes are GB/T 2828.1, GB/T 2829, GB/T 4208-2008, GB/T 13384 and GB/T 25480. It replaces JB/T 9341.2-1999.
Found what you need?
Document preview — JB/T 9341.2-2013
National Standard of the People's Republic of China
- ICS
- 37.020
- Replacing
- JB/T 9341.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 9341.2-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It is one of 4 parts of the JB/T 9341 series.
2 Scope
This standard is the recommended Chinese machinery industry standard for the digital readout unit used with metrology gratings. It classifies these readout meters and cards, then sets their basic parameters, their requirements, the test methods and the inspection rules, together with the provisions on marking, packaging, transport and storage. The readout is the instrument that turns the grating signal into a displayed figure. The document sits under Chinese classification N34 and international classification 37.020. Among the standards it quotes are GB/T 2828.1, GB/T 2829, GB/T 4208-2008, GB/T 13384 and GB/T 25480. It replaces JB/T 9341.2-1999.
3 Normative references
JB/T 9341.2-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2828.1
GB/T 2829
GB/T 4208-2008
GB/T 13384
GB/T 25480
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 9341.1-2013 — Metrological gratings - Part 1: Terminology
JB/T 9341.3-1999 — Metrology grating technology -- Technical requiremnts for grating bar of galss
JB/T 9341.4-1999 — Metrology grating technology -- Technical requiremnts for grating disk of glass
6 Classification and status
International classification (ICS): 37.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 4208-2008Degrees of protection provided by enclosures (IP code)
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 25480Basic environmental conditions and testing methods for transportation and storage of instruments
Editions of JB/T 9341.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9341.2-2013 | Metrology grating - Part 2: Digital readout | current edition | Current |
| JB/T 9341.2-1999 | Metrology grating - Part 2: Digital readout | previous edition | Superseded |
This page sells the current edition, JB/T 9341.2-2013. Earlier editions are listed for reference only.
How to Download JB/T 9341.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 25480-2010 — Basic environmental conditions and testing methods for transportation and storage of instruments
Secure payment via Stripe
Payments accepted
JB/T 9341.2-2013
$239.00