JB/T 9205-2008Metallographic examination of induction hardened pearlitic ductile iron parts (English PDF)
珠光体球墨铸铁零件感应淬火金相检验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9205-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 9205-2008 is the English-translated version of 珠光体球墨铸铁零件感应淬火金相检验.
JB/T 9205-2008 is the Chinese standard "Metallographic examination of induction hardened pearlitic ductile iron parts". Its scope clause reads: This standard specifies the technical requirements and corresponding method for metallographic examination of pearlitic graphite cast iron parts induction hardened.
It is applicable to the examination of the metallographic structure and depth of the hardened layer of the graphite cast iron parts having a pearlite volume coefficient of not less than 75%, which have passed high and medium frequency induction hardening and low temperature tempering (with tempering temperature <=200°C). Its clauses include terms and definitions; technical requirements.
Found what you need?
Document preview — JB/T 9205-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 9205-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 5 Preparation of specimens
- 6 Examination method
1 Scope
This standard specifies the technical requirements and corresponding method for metallographic examination of pearlitic graphite cast iron parts induction hardened. It is applicable to the examination of the metallographic structure and depth of the hardened layer of the graphite cast iron parts having a pearlite volume coefficient of not less than 75%, which have passed high and medium frequency induction hardening and low temperature tempering (with tempering temperature <=200°C).
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 7232 Terminology of metal heat treatment
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GB/T 7232, as well as the following apply.
3.1 delimitation microstructure
delimitation structure with area fraction of pearlite as 20%; in special circumstances, other delimitation structures may be adopted through negotiation between the parties concerned
4 Technical requirements
4.1
The surface hardness and hardened layer depth of parts shall meet the requirements of the product drawing.
4.2
After being subjected to induction hardening at high and medium frequency , the surfaces of parts shall be free of defects such as hardening cracks and burns.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
Similar standards
Editions of JB/T 9205
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9205-2008 | Metallographic examination of induction hardened pearlitic ductile iron parts | current edition | Current |
| JB/T 9205-1999 | Metallographic examination of induction hardened pearlitic ductile iron parts | previous edition | Superseded |
This page sells the current edition, JB/T 9205-2008. Earlier editions are listed for reference only.
How to Download JB/T 9205-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 9205-2008
$105.00