JB/T 6016.3-2008Internal combustion engines - Metallographic examination of piston rings - Part 3: Ductile iron piston rings (English PDF)
内燃机 活塞环金相检验 第3部分：球墨铸铁活塞环
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6016.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 6016.3-2008 is the English-translated version of 内燃机 活塞环金相检验 第3部分：球墨铸铁活塞环.
JB/T 6016.3-2008 is a recommended Chinese machinery industry standard that deals with the metallographic examination of ductile cast iron piston rings for internal combustion engines.
It prescribes the test method for the microstructure and the method by which the microstructure is assessed. The examination it describes is intended for piston rings in engines whose cylinder diameter is 160 mm or less.
Classified J92 in the Chinese system and 27.020 in the international one. It quotes GB/T 9441-1988.
Found what you need?
Document preview — JB/T 6016.3-2008
National Standard of the People's Republic of China
- ICS
- 27.020
- Replacing
- JB/T 6724-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 6016.3-2008 was issued by MIIT on 1 February 2008 and has been in force since 1 July 2008.
It is one of 5 parts of the JB/T 6016 series.
2 Scope
This standard is a recommended Chinese machinery industry standard that deals with the metallographic examination of ductile cast iron piston rings for internal combustion engines. It prescribes the test method for the microstructure and the method by which the microstructure is assessed. The examination it describes is intended for piston rings in engines whose cylinder diameter is 160 mm or less. Classified J92 in the Chinese system and 27.020 in the international one. It quotes GB/T 9441-1988.
3 Normative references
JB/T 6016.3-2008 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 9441-1988
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6016-1992 — Individually cast piston rings for internal combustion engines - Metallographic examination
JB/T 6016.1-2008 — Part 1: Individually cast piston rings
JB/T 6016.4-2008 — Part 4: Medium and high alloy cast iron piston rings
JB/T 6016.5-2011 — Piston rings - Metallographic examination - Part 5: Individually cast boron cast iron piston rings
6 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 6016.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6016.3-2008 | Internal combustion engines - Metallographic examination of piston rings - Part 3: Ductile iron piston rings | current edition | Current |
| JB/T 6724-1993 | Internal combustion engines - Metallographic examination of piston rings - Part 3: Ductile iron piston rings | previous edition | Superseded |
This page sells the current edition, JB/T 6016.3-2008. Earlier editions are listed for reference only.
How to Download JB/T 6016.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 6016.4-2008 — Internal combustion engines - Metallographic examination of piston rings - Part 4: Medium and high alloy cast iron piston rings
JB/T 6016.1-2008 — Internal combustion engines - Metallographic examination of piston rings - Part 1: Individually cast piston rings
JB/T 6016.5-2011 — Internal combustion engines - Piston rings - Metallographic examination - Part 5: Individually cast boron cast iron piston rings
Secure payment via Stripe
Payments accepted
JB/T 6016.3-2008
$105.00