Valid

JB/T 8950.2-2013Phase Control Thyristors - Part 2: Disc Devices (English PDF)

普通晶闸管 第2部分:平板形器件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8950.2-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 8950.2-2013 is the English-translated version of 普通晶闸管 第2部分:平板形器件.

JB/T 8950.2-2013 is a recommended Chinese machinery industry standard for phase control thyristors built in disc form.

It deals with flat-shaped reverse-blocking triode thyristors of symmetrical blocking characteristic whose case-rated on-state average current runs from 200 A to 5000 A. For these devices it sets the type designations and dimensions, the ratings and the characteristics, and the inspection rules.

Chinese classification K46 and international classification 31.080.20 are recorded for it. Among the standards it quotes are GB/T 4937-1995, GB/T 15291, JB/T 2423, JB/T 4277 and JB/T 7626-2013. It replaces JB/T 8950.2-1999, JB/T 5838-1991 and JB/T 5839-1991.

Found what you need?

Document preview — JB/T 8950.2-2013

National Standard of the People's Republic of China

ICS
31.080.20
Replacing
JB/T 8950.2-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 8950.2-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It replaces the earlier edition JB/T 8950.2-1999.

It is one of 3 parts of the JB/T 8950 series.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for phase control thyristors built in disc form. It deals with flat-shaped reverse-blocking triode thyristors of symmetrical blocking characteristic whose case-rated on-state average current runs from 200 A to 5000 A. For these devices it sets the type designations and dimensions, the ratings and the characteristics, and the inspection rules. Chinese classification K46 and international classification 31.080.20 are recorded for it. Among the standards it quotes are GB/T 4937-1995, GB/T 15291, JB/T 2423, JB/T 4277 and JB/T 7626-2013. It replaces JB/T 8950.2-1999, JB/T 5838-1991 and JB/T 5839-1991.

JB/T 8950.2-2013 falls under ICS 31.080.20, in the field of electronics.

This catalogue holds 51 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 4937-1995 — Mechanical and climatic test methods for semiconductor devices

GB/T 15291

JB/T 2423

JB/T 4277

JB/T 7626-2013 — Test methods for reverse blocking triode thyristors

4 Where this standard sits

It cites 5 standards, among them GB/T 4937-1995, JB/T 7626-2013, listed in full above.

It is one part of the JB/T 8950 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 8950.1-1999 — General purpose thyristors for currents below 100 A

JB/T 8950.1-2013 — 1: Stud Devices

Other editions:

JB/T 8950.2-1999 (earlier edition)

Standards on related subjects:

GB/T 31487.3-2015 — Direct current de-icing devices -- Part 3: Tests

GB/T 3859.1-2013 — Semiconductor converters -- General requirements and line commutated Converters -- Part 1-1: Specification of basic requirements

GB/T 13422-2013 — Semiconductor converters - Electrical test methods

JB/T 8951.2-2025 — Insulated gate bipolar transistor (IGBT) - Part 2: Arm Module

JB/T 8951.1-2025 — Insulated gate bipolar transistor (IGBT) - Part 1: Single Transistor

7 Classification and status

International classification (ICS): 31.080.20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8950.2

EditionTitleRevisionStatus
JB/T 8950.2-2013Phase Control Thyristors - Part 2: Disc Devicescurrent editionCurrent
JB/T 8950.2-1999Phase Control Thyristors - Part 2: Disc Devicesprevious editionSuperseded

This page sells the current edition, JB/T 8950.2-2013. Earlier editions are listed for reference only.

How to Download JB/T 8950.2-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8950.2-2013

$195.00