Valid

JB/T 8919-2010Rolling bearings - Insert bearings and eccentric locking collars - Specifications (English PDF)

滚动轴承 外球面球轴承和偏心套 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8919-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 8919-2010 is the English-translated version of 滚动轴承 外球面球轴承和偏心套 技术条件.

JB/T 8919-2010 is the Chinese standard "Rolling bearings - Insert bearings and eccentric locking collars - Specifications". Its scope clause reads: This standard specifies the technical requirements, measurement methods, inspection rules, packaging and marking of insert bearings (hereinafter referred to as “bearings”) and eccentric locking collars.

This standard is applicable to the production and inspection by manufacturers and customer acceptance of the bearings and eccentric locking collars whose boundary dimensions meeting the requirements of GB/T 3882.

Found what you need?

Document preview — JB/T 8919-2010

National Standard of the People's Republic of China

Replacing
JB/T 8919-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Symbols (see Figure 1~Figure 7)
  • 5 Technical Requirements
  • 5.1 Materials and Heat Treatment
  • 5.2 Tolerance
  • 5.3 Surface Roughness
  • 5.5 Residual Magnetism
  • 5.6 Marking
  • 5.7 Others
  • 6 Measurement Methods
  • 6.1 Measurement of Accuracy
  • 6.2 Radial Internal Clearance
  • 6.3 Hardness
  • 6.4 Residual Magnetism
  • 7 Inspection Rules
  • 8 Marking
  • 9 Packaging, Storage and Transportation

1 Scope

This standard specifies the technical requirements, measurement methods, inspection rules, packaging and marking of insert bearings (hereinafter referred to as “bearings”) and eccentric locking collars.

This standard is applicable to the production and inspection by manufacturers and customer acceptance of the bearings and eccentric locking collars whose boundary dimensions meeting the requirements of GB/T 3882.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

GB/T 307.2-2005 Rolling Bearings-Measuring and Gauging Principles and Methods (ISO 1132-2: 2001, Roiling bearings-Tolerances-Part 2; Measuring and gauging principles and methods, MOD)

GB/T 699-1999 Quality Carbon Structural Steels

GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes-Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1: 1999, IDT)

GB/T 3882-1995 Rolling Bearings-Insert Bearings and Eccentric Locking Collars-Boundary Dimensions (neq ISO 9628: 1992)

GB/T 4199-2003 Rolling Bearings-Tolerances-Definitions (ISO 1132-1: 2000, Rolling bearings-Tolerances-Part 1: Terms and definitions, MOD)

GB/T 6930-2002 Rolling Bearings-Vocabulary (ISO 5593: 1997, IDT)

GB 7324-1994 General Purpose Lithium Lubricating Grease

GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging

GB/T 18254-2002 High-carbon Chromium Bearing Steel

JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel

JB/T 3574-1997 Rolling Bearings-Marking for Products

JB/T 5304-2007 Rolling Bearings-Insert Bearings-Radial Internal Clearance

JB/T 6641-2007 Rolling Bearings-Residual Magnetism and Its Assessment Method

JB/T 7361-2007 Rolling Bearings-Test Method for Hardness of Parts […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8919

EditionTitleRevisionStatus
JB/T 8919-2010Rolling bearings - Insert bearings and eccentric locking collars - Specificationscurrent editionCurrent
JB/T 8919-1999Rolling bearings - Insert bearings and eccentric locking collars - Specificationsprevious editionSuperseded

This page sells the current edition, JB/T 8919-2010. Earlier editions are listed for reference only.

How to Download JB/T 8919-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8919-2010

$209.00