JB/T 8917-2015Roller press (English PDF)
辊压机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8917-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 8917-2015 is the English-translated version of 辊压机.
JB/T 8917-2015 is the recommended Chinese machinery industry standard for the roller press. It sets the types of roller press and its basic parameters, then the technical requirements, the test methods and the inspection rules for the machine.
Marking, packaging, transportation and storage are dealt with at the end. The presses it covers are those used in building materials and other industrial sectors for grinding brittle materials.
Among the standards it quotes are GB/T 191, GB/T 1804-2000, GB/T 3639, GB/T 11345-2013 and JB/T 5000.15-2007. It replaces JB/T 8917-1999 and is classified D94 in the Chinese system.
Found what you need?
Document preview — JB/T 8917-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 8917-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8917-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 8917-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for the roller press. It sets the types of roller press and its basic parameters, then the technical requirements, the test methods and the inspection rules for the machine. Marking, packaging, transportation and storage are dealt with at the end. The presses it covers are those used in building materials and other industrial sectors for grinding brittle materials. Among the standards it quotes are GB/T 191, GB/T 1804-2000, GB/T 3639, GB/T 11345-2013 and JB/T 5000.15-2007. It replaces JB/T 8917-1999 and is classified D94 in the Chinese system.
JB/T 8917-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3639
GB/T 11345-2013 — Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
GB/T 13306
JB/T 1265
JB/T 5000.12
JB/T 5000.13
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8917-1999 (earlier edition)
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 25708-2010 — Ball mills and rod mills
JB/T 8914-2025 — Tube mill
JB/T 8916-2017 — Rotary kilns
JB/T 8915-2017 — Single-tube coolers
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3639Seamless cold-drawn or cold-rolled steel tubes for precision applications
- GB/T 11345-2013Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment
- GB/T 13306Plates
- JB/T 1265Rotor and shaft forgings for 25 MW to 200 MW steam turbines - Technical requirements
Editions of JB/T 8917
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8917-2015 | Roller press | current edition | Current |
| JB/T 8917-1999 | Roller press | previous edition | Superseded |
This page sells the current edition, JB/T 8917-2015. Earlier editions are listed for reference only.
How to Download JB/T 8917-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 8917-2015
$199.00