Valid

JB/T 8892-2011Internal combustion engines - Metallographic examination of rare earth eutectic aluminium-silicon alloy pistons (English PDF)

内燃机 稀土共晶铝硅合金活塞 金相检验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8892-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 8892-2011 is the English-translated version of 内燃机 稀土共晶铝硅合金活塞 金相检验.

JB/T 8892-2011 is a recommended Chinese machinery industry standard on the metallographic examination of internal combustion engine pistons made of rare earth eutectic aluminium-silicon alloy, the alloy being referred to as 66-1.

It sets the technical requirements for the piston microstructure after heat treatment, the methods of inspecting and assessing that microstructure, and the rating used.

It applies to the microstructural inspection of such pistons in reciprocating internal combustion engines of cylinder diameter not more than 200 mm. It replaces JB/T 8892-1999 and quotes JB/T 6289-2005.

Issued by the Ministry of Industry and Information Technology, it carries Chinese classification J92 and international classification 27.020.

Found what you need?

Document preview — JB/T 8892-2011

National Standard of the People's Republic of China

ICS
27.020
Replacing
JB/T 8892-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 8892-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.

It replaces the earlier edition JB/T 8892-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on the metallographic examination of internal combustion engine pistons made of rare earth eutectic aluminium-silicon alloy, the alloy being referred to as 66-1. It sets the technical requirements for the piston microstructure after heat treatment, the methods of inspecting and assessing that microstructure, and the rating used. It applies to the microstructural inspection of such pistons in reciprocating internal combustion engines of cylinder diameter not more than 200 mm. It replaces JB/T 8892-1999 and quotes JB/T 6289-2005. Issued by the Ministry of Industry and Information Technology, it carries Chinese classification J92 and international classification 27.020.

JB/T 8892-2011 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

JB/T 6289-2005 — Internal combustion engines - Cast aluminium pistons - Metallographic examination

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 8892-1999 (earlier edition)

Standards on related subjects:

GB/T 1148-2010 — Internal combustion engines - Aluminium pistons - Specifications

JB/T 6729-2007 — Internal combustion engines - Magnetic particle testing of crankshafts and camshafts

JB/T 6289-2005 — Internal combustion engines - Cast aluminium pistons - Metallographic examination

JB/T 6721-2025 — Internal combustion engine - link - Magnetic Particle Testing

JB/T 5084-2025 — Internal combustion engine - Crankshaft thrust washer - Technical specifications

JB/T 8894-2015 — Reciprocating internal combustion engines - Flywheels - Mounting dimensions for clutches

6 Classification and status

International classification (ICS): 27.020

Chinese Standard Classification (CCS): J 92

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8892

EditionTitleRevisionStatus
JB/T 8892-2011Internal combustion engines - Metallographic examination of rare earth eutectic aluminium-silicon alloy pistonscurrent editionCurrent
JB/T 8892-1999Internal combustion engines - Metallographic examination of rare earth eutectic aluminium-silicon alloy pistonsprevious editionSuperseded

This page sells the current edition, JB/T 8892-2011. Earlier editions are listed for reference only.

How to Download JB/T 8892-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8892-2011

$105.00