JB/T 8828-2001General technical requirements for machined parts (English PDF)
切削加工件通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8828-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 23, 2001
Implementation date
October 1, 2001
Scope
JB/T 8828-2001 is the English-translated version of 切削加工件通用技术条件.
JB/T 8828-2001 is the Chinese machinery industry standard covering general technical requirements for machined parts. It was issued on 23 May 2001 and has been in force since 1 October 2001, replacing JB/T 8828-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2001 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8828-2001
National Standard of the People's Republic of China
- Replacing
- JB/T 8828-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8828-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 May 2001 and has been in force since 1 October 2001.
It replaces the earlier edition JB/T 8828-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8828-2001 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 8828-2025 (later edition)
JB/T 8828-1999 (earlier edition)
Standards on related subjects:
JB/T 10155-2012 — Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper
GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines
JB/T 8010.3-1999 — Parts and units of machine tool fixtures - Sliding bent clamps
JB/T 8869-2025 — Steelflex couplings
5 Classification and status
Chinese Standard Classification (CCS): J 40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 12918-2016Pulp diaphragm pump units
- JB/T 12250-2015Double-face matchplate horizontally parted flaskless automatic moulding lines
- JB/T 11540-2013V-process trolley-type moulding lines - Technical requirements
- JB/T 11544-2013V-process rotary table moulding lines - Technical requirements
- JB/T 6334-2013Double-face matchplate horizontally parted flaskless automatic moulding machines
- JB/T 6577-2011Electric ladle dryers - Technical requirements
Similar standards
Editions of JB/T 8828
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8828-2001 | General technical requirements for machined parts | current edition | Current |
| JB/T 8828-1999 | General technical requirements for machined parts | previous edition | Superseded |
This page sells the current edition, JB/T 8828-2001. Earlier editions are listed for reference only.
How to Download JB/T 8828-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 8828-2001
$209.00