JB/T 8514.2-1997Guidelines for enterprise standardization - General rules for preparing enterprise standard system tables (English PDF)
企业标准化工作导则 编制企业标准体系表的一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8514.2-1997 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 4, 1997
Implementation date
October 1, 1997
Scope
JB/T 8514.2-1997 is the English-translated version of 企业标准化工作导则 编制企业标准体系表的一般规定.
JB/T 8514.2-1997 is the Chinese machinery industry standard covering guidelines for enterprise standardization - General rules for preparing enterprise standard system tables.
It was issued on 4 March 1997 and has been in force since 1 October 1997, replacing JB/Z 290.2-1988. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1997 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8514.2-1997
National Standard of the People's Republic of China
- Replacing
- JB/Z 290.2-1988
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8514.2-1997 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 March 1997 and has been in force since 1 October 1997.
It is one of 3 parts of the JB/T 8514 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8514.2-1997 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 8514.1-1997 — General
JB/T 8514.3-1997 — Basic rules for drafting management standards and work standards
Standards on related subjects:
JB/T 6063-2006 — Non-destructive testing - Materials for magnetic particle testing
5 Classification and status
Chinese Standard Classification (CCS): J 01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 8514.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8514.2-1997 | Guidelines for enterprise standardization - General rules for preparing enterprise standard system tables | current edition | Current |
| JB/Z 290.2-1988 | Guidelines for enterprise standardization - General rules for preparing enterprise standard system tables | previous edition | Superseded |
This page sells the current edition, JB/T 8514.2-1997. Earlier editions are listed for reference only.
How to Download JB/T 8514.2-1997
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8514.3-1997 — Guidelines for enterprise standardization - Basic rules for drafting management standards and work standards
JB/T 8514.1-1997 — Guidelines for enterprise standardization - General
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
Secure payment via Stripe
Payments accepted
JB/T 8514.2-1997
$325.00