JB/T 8461-2018Hydraulic taper sleeves (English PDF)
液压锥套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8461-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2018
Implementation date
December 1, 2018
Scope
JB/T 8461-2018 is the English-translated version of 液压锥套.
JB/T 8461-2018 is a recommended standard of the Chinese machinery industry on the hydraulic cone sleeve. It sets the structural type and the basic parameters of the YZTA and YZTB types, then the technical requirements, the test methods, the inspection rules and the provisions for signs, packaging and storage.
It quotes the documents it quotes, among them GB/T 1031-2009, GB/T 1184-1996, GB/T 1800.2-2009, GB/T 11345-2013, JB/T 5000.8-2007, JB/T 5000.15-2007 and JB/T 6396-2006.
It replaces JB/T 8461-1996. Chinese classification H90 and international classification 77.180 are recorded for it.
Found what you need?
Document preview — JB/T 8461-2018
National Standard of the People's Republic of China
- ICS
- 77.180
- Replacing
- JB/T 8461-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 8461-2018 was issued by MIIT on 30 April 2018 and has been in force since 1 December 2018.
It replaces the earlier edition JB/T 8461-1996.
2 Scope
This standard is a recommended standard of the Chinese machinery industry on the hydraulic cone sleeve. It sets the structural type and the basic parameters of the YZTA and YZTB types, then the technical requirements, the test methods, the inspection rules and the provisions for signs, packaging and storage. It quotes the documents it quotes, among them GB/T 1031-2009, GB/T 1184-1996, GB/T 1800.2-2009, GB/T 11345-2013, JB/T 5000.8-2007, JB/T 5000.15-2007 and JB/T 6396-2006. It replaces JB/T 8461-1996. Chinese classification H90 and international classification 77.180 are recorded for it.
3 Normative references
JB/T 8461-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-2009
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 4879
GB/T 7284
GB/T 8166
GB 11118.1-2011 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB/T 11345-2013
GB/T 19418-2003 — Arc-welded joints in steel -- Guidance on quality levels for imperfections
JB/T 5000.8-2007 — General technical requirements for heavy machinery - Part 8: Forgings
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
JB/T 6396-2006 — Large alloy structural steel forgings - Technical requirements
SH/T 0358-1995
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8461-1996 (earlier edition)
6 Classification and status
International classification (ICS): 77.180
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.2-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
SH/T 0358-1995
Similar standards
Editions of JB/T 8461
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8461-2018 | Hydraulic taper sleeves | current edition | Current |
| JB/T 8461-1996 | Hydraulic taper sleeves | previous edition | Superseded |
This page sells the current edition, JB/T 8461-2018. Earlier editions are listed for reference only.
How to Download JB/T 8461-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118.1-2011 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
Secure payment via Stripe
Payments accepted
JB/T 8461-2018
$180.00