JB/T 8135.23-2013Packaging of winding wires - Part 23: Cylindrical barrelled delivery spools-nonrecoverable spools made from thermoplastic material (English PDF)
绕组线包装 第23部分：圆柱形交货线盘 热塑性材料非回收线盘
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8135.23-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 8135.23-2013 is the English-translated version of 绕组线包装 第23部分：圆柱形交货线盘 热塑性材料非回收线盘.
JB/T 8135.23-2013 is the part of the Chinese machinery industry standard on packaging of winding wires that specifies non-returnable cylindrical barrelled delivery spools made from thermoplastic material.
It gives the requirements that spools of this description must satisfy. It applies to non-recovery cylindrical delivery spools of thermoplastic material used to package winding wire.
The part is a recommended standard of the Chinese machinery industry and an identical (IDT) adoption of IEC 60264-2-3:1990. It quotes JB/T 8135.21-2013 and JB/T 8135.41-2013.
The Chinese classification recorded for it is K12 and its international classification 29.060.01.
Found what you need?
Document preview — JB/T 8135.23-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 8135.4-1997
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 8135.23-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 22 parts of the JB/T 8135 series.
2 Scope
This standard is the part of the Chinese machinery industry standard on packaging of winding wires that specifies non-returnable cylindrical barrelled delivery spools made from thermoplastic material. It gives the requirements that spools of this description must satisfy. It applies to non-recovery cylindrical delivery spools of thermoplastic material used to package winding wire. The part is a recommended standard of the Chinese machinery industry and an identical (IDT) adoption of IEC 60264-2-3:1990. It quotes JB/T 8135.21-2013 and JB/T 8135.41-2013. The Chinese classification recorded for it is K12 and its international classification 29.060.01.
3 Normative references
JB/T 8135.23-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
JB/T 8135.21-2013 — Packaging of winding wires - Part 21: Cylindrical barrelled delivery spools - Basic dimensions
JB/T 8135.41-2013 — Packaging of winding wires - Part 41: Methods of test - Delivery spools made from thermoplastic materials
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8135.1-1997 — 1: Containers for round winding wires
JB/T 8135.1-2013 — 1: Containers for round winding wires
JB/T 8135.2-1997 — 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions
JB/T 8135.3-1997 — 2: Cylindrical barrelled delivery spools - Section 2: Returnable spools made from thermoplastic material
JB/T 8135.4-1997 — 2: Cylindrical barrelled delivery spools - Section 3: Non-returnable spools made from thermoplastic material
JB/T 8135.5-1997 — 3: Taper barrelled delivery spools - Section 1: Basic dimensions
JB/T 8135.6-1997 — 3: Taper barrelled delivery spools - Section 2: Returnable spools made from thermoplastic material
JB/T 8135.7-1997 — 3: Taper barrelled delivery spools - Section 3: Non-returnable spools made from thermoplastic material
JB/T 8135.8-1997 — 3: Taper barrelled delivery spools - Section 4: Basic dimensions of containers for taper barrelled delivery spools
JB/T 8135.9-1997 — 3: Taper barrelled delivery spools - Section 5: Spool containers made from thermoplastic material
JB/T 8135.10-1997 — 4: Test methods - Section 1: Thermoplastic delivery spools
JB/T 8135.11-1997 — 4: Test methods - Section 2: Thermoplastic containers for taper barrelled delivery spools
JB/T 8135.21-2013 — 21: Cylindrical barrelled delivery spools - Basic dimensions
JB/T 8135.22-2013 — 22: Cylindrical barrelled delivery spools-recoverable wire coil made from thermoplastic material
JB/T 8135.31-2013 — 31: Taper barrelled delivery spools - Basic dimensions
JB/T 8135.32-2013 — 32: Taper barrelled delivery spools - Recoverable spools made from thermoplastic material
JB/T 8135.33-2013 — 33: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material
JB/T 8135.34-2013 — Packing of winding wires - Part 34: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools
JB/T 8135.35-2013 — Packing of winding wires - Part 35: Taper barrelled delivery spools - containers for spools made from thermoplastic material
JB/T 8135.41-2013 — 41: Methods of test - Delivery spools made from thermoplastic materials
JB/T 8135.42-2013 — Packing of winding wires - Part 42: Methods of test-containers made from thermoplastic materials for taper barrelled delivery spools
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 8135.23
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8135.23-2013 | Packaging of winding wires - Part 23: Cylindrical barrelled delivery spools-nonrecoverable spools made from thermoplastic material | current edition | Current |
| JB/T 8135.4-1997 | Packaging of winding wires - Part 23: Cylindrical barrelled delivery spools-nonrecoverable spools made from thermoplastic material | previous edition | Superseded |
This page sells the current edition, JB/T 8135.23-2013. Earlier editions are listed for reference only.
How to Download JB/T 8135.23-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8135.21-2013 — Packaging of winding wires - Part 21: Cylindrical barrelled delivery spools - Basic dimensions
JB/T 8135.41-2013 — Packaging of winding wires - Part 41: Methods of test - Delivery spools made from thermoplastic materials
JB/T 8135.31-2013 — Packaging of winding wires - Part 31: Taper barrelled delivery spools - Basic dimensions
Secure payment via Stripe
Payments accepted
JB/T 8135.23-2013
$139.00