JB/T 8135.22-2013Packaging of winding wires - Part 22: Cylindrical barrelled delivery spools-recoverable wire coil made from thermoplastic material (English PDF)
绕组线包装 第22部分：圆柱形交货线盘 热塑性材料可回收线盘
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8135.22-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 8135.22-2013 is the English-translated version of 绕组线包装 第22部分：圆柱形交货线盘 热塑性材料可回收线盘.
JB/T 8135.22-2013 is the part of the Chinese machinery industry standard on packaging of winding wires covering returnable cylindrical barrelled delivery spools made from thermoplastic material.
It states the requirements for these recoverable cylindrical spools, which the text calls reels. It applies to spools of thermoplastic material used in returnable cylindrical packaging for winding wire.
The part is a recommended standard of the Chinese machinery industry and an identical (IDT) adoption of IEC 60264-2-2:1990. It quotes JB/T 8135.21-2013 and JB/T 8135.41-2013, and its classifications are K12 and 29.060.01.
Found what you need?
Document preview — JB/T 8135.22-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 8135.3-1997
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 8135.22-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 22 parts of the JB/T 8135 series.
2 Scope
This standard is the part of the Chinese machinery industry standard on packaging of winding wires covering returnable cylindrical barrelled delivery spools made from thermoplastic material. It states the requirements for these recoverable cylindrical spools, which the text calls reels. It applies to spools of thermoplastic material used in returnable cylindrical packaging for winding wire. The part is a recommended standard of the Chinese machinery industry and an identical (IDT) adoption of IEC 60264-2-2:1990. It quotes JB/T 8135.21-2013 and JB/T 8135.41-2013, and its classifications are K12 and 29.060.01.
3 Normative references
JB/T 8135.22-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
JB/T 8135.21-2013 — Packaging of winding wires - Part 21: Cylindrical barrelled delivery spools - Basic dimensions
JB/T 8135.41-2013 — Packaging of winding wires - Part 41: Methods of test - Delivery spools made from thermoplastic materials
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8135.1-1997 — 1: Containers for round winding wires
JB/T 8135.1-2013 — 1: Containers for round winding wires
JB/T 8135.2-1997 — 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions
JB/T 8135.3-1997 — 2: Cylindrical barrelled delivery spools - Section 2: Returnable spools made from thermoplastic material
JB/T 8135.4-1997 — 2: Cylindrical barrelled delivery spools - Section 3: Non-returnable spools made from thermoplastic material
JB/T 8135.5-1997 — 3: Taper barrelled delivery spools - Section 1: Basic dimensions
JB/T 8135.6-1997 — 3: Taper barrelled delivery spools - Section 2: Returnable spools made from thermoplastic material
JB/T 8135.7-1997 — 3: Taper barrelled delivery spools - Section 3: Non-returnable spools made from thermoplastic material
JB/T 8135.8-1997 — 3: Taper barrelled delivery spools - Section 4: Basic dimensions of containers for taper barrelled delivery spools
JB/T 8135.9-1997 — 3: Taper barrelled delivery spools - Section 5: Spool containers made from thermoplastic material
JB/T 8135.10-1997 — 4: Test methods - Section 1: Thermoplastic delivery spools
JB/T 8135.11-1997 — 4: Test methods - Section 2: Thermoplastic containers for taper barrelled delivery spools
JB/T 8135.21-2013 — 21: Cylindrical barrelled delivery spools - Basic dimensions
JB/T 8135.23-2013 — 23: Cylindrical barrelled delivery spools-nonrecoverable spools made from thermoplastic material
JB/T 8135.31-2013 — 31: Taper barrelled delivery spools - Basic dimensions
JB/T 8135.32-2013 — 32: Taper barrelled delivery spools - Recoverable spools made from thermoplastic material
JB/T 8135.33-2013 — 33: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material
JB/T 8135.34-2013 — Packing of winding wires - Part 34: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools
JB/T 8135.35-2013 — Packing of winding wires - Part 35: Taper barrelled delivery spools - containers for spools made from thermoplastic material
JB/T 8135.41-2013 — 41: Methods of test - Delivery spools made from thermoplastic materials
JB/T 8135.42-2013 — Packing of winding wires - Part 42: Methods of test-containers made from thermoplastic materials for taper barrelled delivery spools
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 8135.22
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8135.22-2013 | Packaging of winding wires - Part 22: Cylindrical barrelled delivery spools-recoverable wire coil made from thermoplastic material | current edition | Current |
| JB/T 8135.3-1997 | Packaging of winding wires - Part 22: Cylindrical barrelled delivery spools-recoverable wire coil made from thermoplastic material | previous edition | Superseded |
This page sells the current edition, JB/T 8135.22-2013. Earlier editions are listed for reference only.
How to Download JB/T 8135.22-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8135.21-2013 — Packaging of winding wires - Part 21: Cylindrical barrelled delivery spools - Basic dimensions
JB/T 8135.41-2013 — Packaging of winding wires - Part 41: Methods of test - Delivery spools made from thermoplastic materials
JB/T 8135.23-2013 — Packaging of winding wires - Part 23: Cylindrical barrelled delivery spools-nonrecoverable spools made from thermoplastic material
Secure payment via Stripe
Payments accepted
JB/T 8135.22-2013
$139.00