JB/T 7948.4-2017Methods for chemical analysis of welding fluxes - Part 4: Determination of iron oxide content (English PDF)

1 Foreword

JB/T 7948.4-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.

It replaces the earlier edition JB/T 7948.4-1999.

It is one of 20 parts of the JB/T 7948 series.

2 Scope

This standard is the Chinese machinery industry standard for the determination of the iron oxide content of welding fluxes, the fourth part of the JB/T 7948 chemical analysis methods. Its method rests on a stated principle and calls for named reagents and instruments. The standard describes the sample, the steps of the analysis, the way the result is calculated and the difference permitted between determinations. It is recommended, classified J33 in the Chinese scheme and 25.160.20 internationally. Among the standards it quotes are GB/T 6682, GB/T 12806, GB/T 12809, GB/T 12810 and JB/T 7948.2-2017.

3 Normative references

JB/T 7948.4-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 6682

GB/T 12806

GB/T 12808

GB/T 12809

GB/T 12810

JB/T 7948.2-2017 — Methods for chemical analysis of welding fluxes - Part 2: Determination of manganese oxide content

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 7948.1-1999 — Methods for chemical analysis of fused welding fluxes - Determination of silicon dioxide content by gravimetric method

JB/T 7948.1-2017 — Part 1: Determination of silicon dioxide content

JB/T 7948.2-1999 — Methods for chemical analysis of fused welding fluxes - Determination of manganese oxide content by potentiometric titration method

JB/T 7948.2-2017 — Part 2: Determination of manganese oxide content

JB/T 7948.3-1999 — Methods for chemical analysis of fused welding fluxes - Determination of manganese oxide content by permanganate photometric method

JB/T 7948.3-2017 — Part 3: Determination of aluminium oxide content

JB/T 7948.5-1999 — Methods for chemical analysis of fused welding fluxes - Determination of iron oxide content by sulfosalicylic acid photometric method

JB/T 7948.5-2017 — Part 5: Determination of calcium fluoride content

JB/T 7948.6-1999 — Methods for chemical analysis of fused welding fluxes - Determination of calcium fluoride content by pyrohydrolysis method

JB/T 7948.6-2017 — Part 6: Determination of phosphorus content

JB/T 7948.7-1999 — Methods for chemical analysis of fused welding fluxes - Determination of calcium fluoride content by lead chlorofluoride-EDTA volumetric method

JB/T 7948.7-2017 — Part 7: Determination of sodium oxide and potassium oxide content

JB/T 7948.8-1999 — Methods for chemical analysis of fused welding fluxes - Determination of phosphorus content by molybdenum blue photometric method

JB/T 7948.8-2017 — Part 8: Determination of carbon and sulfur content

JB/T 7948.9-1999 — Methods for chemical analysis of fused welding fluxes - Determination of sodium oxide and potassium oxide content by flame photometry

JB/T 7948.9-2017 — Part 9: Determination of calcium oxide and magnesium oxide content

JB/T 7948.10-1999 — Methods for chemical analysis of fused welding fluxes - Determination of carbon content by combustion-coulometric method

JB/T 7948.11-1999 — Methods for chemical analysis of fused welding fluxes - Determination of sulfur content by combustion-iodometric method

JB/T 7948.12-1999 — Methods for chemical analysis of fused welding fluxes - Determination of calcium oxide and magnesium oxide content by EDTA volumetric method

Other editions:

JB/T 7948.4-1999 (earlier edition)

6 Classification and status

International classification (ICS): 25.160.20

Prefix JB/T: recommended standard.