JB/T 7885.3-2013Saw linters - Part 3: Ribs (English PDF)
锯齿剥绒机 第3部分：肋条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7885.3-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 7885.3-2013 is the English-translated version of 锯齿剥绒机 第3部分：肋条.
JB/T 7885.3-2013 is Part 3 of the recommended Chinese machinery industry standard on saw linters, and it deals with the ribs fitted to them. The part sets out the types and basic dimensions of the ribs, their technical requirements, the test methods, the inspection rules, and the provisions for marking, packaging and storage.
Its field of application is the rib used on a saw linter. The standard is classified B93 in the Chinese scheme and 65.060.99 in the international one. Among the standards it quotes are GB/T 699 and GB/T 905.
JB/T 7885.3-2013 replaces the earlier edition JB/T 7885.3-1999, and the issuing agency is the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 7885.3-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 7885.3-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7885.3-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 7885.3-1999.
It is one of 4 parts of the JB/T 7885 series.
2 Scope Preview
This standard is Part 3 of the recommended Chinese machinery industry standard on saw linters, and it deals with the ribs fitted to them. The part sets out the types and basic dimensions of the ribs, their technical requirements, the test methods, the inspection rules, and the provisions for marking, packaging and storage. Its field of application is the rib used on a saw linter. The standard is classified B93 in the Chinese scheme and 65.060.99 in the international one. Among the standards it quotes are GB/T 699 and GB/T 905. JB/T 7885.3-2013 replaces the earlier edition JB/T 7885.3-1999, and the issuing agency is the Ministry of Industry and Information Technology.
JB/T 7885.3-2013 falls under ICS 65.060.99, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 699
GB/T 905
4 Where this standard sits
It cites 2 standards, listed in full above.
It is one part of the JB/T 7885 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 7885-1995 — Cashmere serrated peel test method
JB/T 7885.1-1999 — Saw linters - Technical specifications
JB/T 7885.2-1999 — Saw linters - Test methods
Other editions:
JB/T 7885.3-1999 (earlier edition)
Standards on related subjects:
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19：Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 7883-2014 — Rice hull expanding machines
JB/T 7884.4-2013 — Saw gins - Part 4: Blocking ribs
JB/T 7884.3-2013 — Saw gins - Part 3: Ribs
7 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7885.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7885.3-2013 | Saw linters - Part 3: Ribs | current edition | Current |
| JB/T 7885.3-1999 | Saw linters - Part 3: Ribs | previous edition | Superseded |
This page sells the current edition, JB/T 7885.3-2013. Earlier editions are listed for reference only.
How to Download JB/T 7885.3-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 699-1988 — Quality carbon structure steel--Technical requirements
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 699-2015 — Quality carbon structure steels
Secure payment via Stripe
Payments accepted
JB/T 7885.3-2013
$105.00