JB/T 7884.3-2013Saw gins - Part 3: Ribs (English PDF)
锯齿轧花机 第3部分：肋条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7884.3-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 7884.3-2013 is the English-translated version of 锯齿轧花机 第3部分：肋条.
JB/T 7884.3-2013 is Part 3 of the recommended Chinese machinery industry standard on saw gins, and it covers the ribs fitted to them. The part fixes the types of rib, their technical requirements, the test methods, the inspection rules, and the provisions for marking, packaging and storage, and it applies to the rib used on a saw-type cotton gin.
Its Chinese classification is B93 and its international classification 65.060.99. Among the standards it quotes are GB/T 1804 and GB/T 9439. JB/T 7884.3-2013 replaces the 1999 edition of the same number, JB/T 7884.3-1999, and the issuing agency recorded for it is the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 7884.3-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 7884.3-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7884.3-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 7884.3-1999.
It is one of 6 parts of the JB/T 7884 series.
2 Scope Preview
This standard is Part 3 of the recommended Chinese machinery industry standard on saw gins, and it covers the ribs fitted to them. The part fixes the types of rib, their technical requirements, the test methods, the inspection rules, and the provisions for marking, packaging and storage, and it applies to the rib used on a saw-type cotton gin. Its Chinese classification is B93 and its international classification 65.060.99. Among the standards it quotes are GB/T 1804 and GB/T 9439. JB/T 7884.3-2013 replaces the 1999 edition of the same number, JB/T 7884.3-1999, and the issuing agency recorded for it is the Ministry of Industry and Information Technology.
JB/T 7884.3-2013 falls under ICS 65.060.99, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1804
GB/T 9439
4 Where this standard sits
It cites 2 standards, listed in full above.
It is one part of the JB/T 7884 series, of which this catalogue holds 6 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 7884-1995 — Serrated cotton gin test methods
JB/T 7884.1-1999 — Saw gins - Technical specifications
JB/T 7884.2-1999 — Saw gins - Test methods
JB/T 7884.4-1999 — Saw gins - Retaining ribs
JB/T 7884.4-2013 — Saw gins - Part 4: Blocking ribs
Other editions:
JB/T 7884.3-1999 (earlier edition)
Standards on related subjects:
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19：Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 7883-2014 — Rice hull expanding machines
JB/T 7885.3-2013 — Saw linters - Part 3: Ribs
7 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7884.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7884.3-2013 | Saw gins - Part 3: Ribs | current edition | Current |
| JB/T 7884.3-1999 | Saw gins - Part 3: Ribs | previous edition | Superseded |
This page sells the current edition, JB/T 7884.3-2013. Earlier editions are listed for reference only.
How to Download JB/T 7884.3-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1804-1992 — General tolerances. Tolerances for linear dimensions without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 9439-1988 — Grey iron castings
Secure payment via Stripe
Payments accepted
JB/T 7884.3-2013
$165.00