JB/T 7883-2014Rice hull expanding machines (English PDF)
稻壳膨化机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7883-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 7883-2014 is the English-translated version of 稻壳膨化机.
JB/T 7883-2014 is the recommended Chinese machinery industry standard for rice hull expanding machines. It lays down the technical requirements for these machines, the test methods used to check them, the inspection rules, and the requirements for marking, packaging, transport and storage.
Its provisions are written for adjustable screw extruders that expand rice husk. GB/T 3768, GB/T 2828.1, GB/T 9480, GB 10395.1, GB 10396 and GB/T 13306 are the standards it calls up.
This single document replaces the earlier two-part treatment, JB/T 7883.1-2000 and JB/T 7883.2-1999. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 7883-2014
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 7883.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 7883-2014 was issued by MIIT on 6 May 2014 and has been in force since 1 October 2014.
It is one of 3 parts of the JB/T 7883 series.
2 Scope
JB/T 7883-2014 is the recommended Chinese machinery industry standard for rice hull expanding machines. It lays down the technical requirements for these machines, the test methods used to check them, the inspection rules, and the requirements for marking, packaging, transport and storage. Its provisions are written for adjustable screw extruders that expand rice husk. GB/T 3768, GB/T 2828.1, GB/T 9480, GB 10395.1, GB 10396 and GB/T 13306 are the standards it calls up. This single document replaces the earlier two-part treatment, JB/T 7883.1-2000 and JB/T 7883.2-1999. Issued on 6 May 2014, it has applied since 1 October 2014.
3 Normative references
JB/T 7883-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 3768
GB/T 2828.1
GB/T 9480
GB 10395.1
GB 10396
GB/T 13306
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 7883.1-2000 — Rice husk expanding machines - Technical requirements
JB/T 7883.2-1999 — Rice hull puffing machines - Test methods
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 9480Tractors machinery for agriculture and forestry, powered lawn and garden equipment -- Operators manuals -- Content and presentation
- GB 10395.1Agricultural machinery - Safety - Part 1: General requirements
- GB 10396Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
- GB/T 13306Plates
Similar standards
Editions of JB/T 7883
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7883-2014 | Rice hull expanding machines | current edition | Current |
| JB/T 7883.2-1999 | Rice hull expanding machines | previous edition | Superseded |
This page sells the current edition, JB/T 7883-2014. Earlier editions are listed for reference only.
How to Download JB/T 7883-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 10395.1-2009 — Agricultural and forestry machinery - Safety - Part 1: General requirements
GB 10395.1-2025 — Agricultural machinery - Safety - Part 1: General requirements
GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
Secure payment via Stripe
Payments accepted
JB/T 7883-2014
$145.00